3D printable components to modify your Racer 130. This repository contains source files. Ready-to-print STL files are available on Thingiverse.
I did this because initially the stock flight controller died, and I replaced it with one with different mounting holes. Then I wanted to use a 19mm micro cam, switchable video transmitter, UXII antenna and addressable LED strip. You get the picture. All that and a full canopy comes in almost 10g less than stock!
The vented canopy is suitable for most conditions, but the solid canopy mates closely with the baseplate and motor wires and accommodates a polycarbonate (2L pop bottle) windshield for wet weather use (winter, light rain).
Requires BH Lib. Checkout to adjacent directories to avoid having to change include paths.
Some minor size variations can be accommodated for LED strip, receiver and video transmitter (by updating config accordingly).
- 5.8GHz UXII antenna
- EWRF SmartAudio 48ch 0/25/100/200mW video transmitter
- FrSky XM+ 16ch micro receiver
- 20x20 flight controller Nox F4 flight controller
- 20x20 4 in 1 ESC HakRC 15A
- 19mm micro cam RunCam Swift Micro 1/3" CCD camera or Caddx Turbo Micro 1/3" CMOS camera
- Micro 4x LED strip WS2812B
- Male XT30 connector 5 pairs