Secretary nfc

Environment

• python 3.8.x
• pipenv
• nfc reader device

Usage

1. Setup environment

$ cd {secretary-nfc_root_dir}
$ pipenv install

2. Regrter device for without sudo

$ sudo vi /etc/udev/rules.d/nfcdev.rules

# you can check the "idVendor" and "idProduct" with `lsusb`
SUBSYSTEM=="usb", ACTION=="add", ATTRS{idVendor}=={{DEVICE_idVendor}}, ATTRS{idProduct}=={{DEVICE_idProduct}}, GROUP="plugdev"

Also you can get messages by pipenv run python3 -m nfc

3. Release device from kernel module

$ sudo sh -c 'echo blacklist port100 >> /etc/modprobe.d/blacklist-nfc.conf'

4. Reboot

$ sudo reboot

5. prepare config.yaml

$ cp config.sample.yaml config.yaml

# config.yaml
{{ nfc-card id }}: {{ username }}

You can check your nfc-card id by running secretary-nfc, touching the card, and checking the log.

6. prepare .env

$ cp .env.sample .env

SECRETARY_ENDPOINT=http://localhost/event

• SECRETARY_ENDPOINT: this is the endpoint of secretary-lab

7. Build docker image

$ docker image build . -t secretary-nfc:latest

8. Run secretary-nfc

$ docker run \
  -v $PWD/config.yaml:/secretary-nfc/config.yaml \
  --device /dev/bus/usb/{{BUS_NUM}}/{DEV_NUM} \
  --env-file .env
  secretary-nfc