Smart Contracts for DAO community

This is a repository for the smart contracts of the DAO community. The smart contracts are written in Solidity and developed and tested using the Foundry framework.

Introduction

DAO community contracts are public goods for community governance. They record the social capital of community participants and can be used to represent membership, manage voting power, and oversee governance within the community. The protocol is designed to publicly and transparently record the achievements of community participants, while also allowing composability with other on-chain protocols. This opens new opportunities for managing and governing communities. When used properly, the protocol can bring significant benefits to both the community as a whole and its individual participants.

This is a repository for the smart contracts of the DAO community governance, which is some basic tools for the community. There are separated tools for the community governance. It will be explained here based on the smart contracts.

All the contracts are sitting in the src/ folder. These are the core contracts of the protocol.

This repository consists of the following smart contracts:

• AmbassadorNft
  • The smart contract for the NFT that represents the membership of the community.
  • This smart contract is independent from the other smart contracts.
  • The contract is based on the ERC1155 contract of the OpenZeppelin.
• ERC20UpgradeableTokenV1
  • The smart contract for the ERC20 token that is used to represent the utility token of the community.
  • Its use case is to be exchanged for the governance token of the community.
  • Other use cases are possible and it is remained to be defined by the community.
  • The contract is based on the ERC20Upgradeable contract of the OpenZeppelin.
• GovToken
  • The smart contract functioning as the governance token of the community.
  • The token is used to represent the voting power of the holder which is not transferable.
  • The contract is based on the ERC20Votes contract of the OpenZeppelin.
• VotingPowerExchange
  • The smart contract for the voting power exchange of the community.
  • The contract is used to get the governance token by burning the utility token the user holds.
  • This contract is created from scratch.
• DaoGovernor
  • The smart contract for the DAO governance of the community.
  • The contract is used to manage the proposal of the community in a more decentralized manner.
  • The contract is based on the Governor contract of the OpenZeppelin.
• Timelock
  • The smart contract for the timelock of the community.
  • This contract will become the owner of the DaoGovernor contract.

Roles

The system is managed by different roles. The roles are managed by the default admin role.

• DEFAULT_ADMIN_ROLE: The default admin role is the owner of the contract.
  • This is the highest authority role in the contract.
  • Responsibilities: Has the power to manage all other roles.
  • Functions: Can grant and revoke all other roles.
• MANAGER_ROLE:
  • Responsibilities: Can manage the contract and call some special functions.
  • Functions: setVotingPowerCap()
• EXCHANGER_ROLE: Exchanger role is the role that can exchange the governance token for the utility token. This role holds the utility token on behalf of the user on the web2 side.
  • Responsibilities: Can exchange the governance token for the utility token.
  • Functions: exchange()
• MINTER_ROLE: The minter role is the role that can mint new tokens.
  • Responsibilities: Can mint new tokens for the ambassador NFT, the utility token and the governance token.
  • Functions: mint(), mintBatch()
• BURNER_ROLE: The burner role is the role that can burn the tokens for the ambassador NFT, the utility token and the governance token.
  • Responsibilities: Can burn the tokens.
  • Functions: burn(), burnBatch(),burnByBurner()
• URI_SETTER_ROLE: The URI setter role is the role that can set the URI of the token.
  • Responsibilities: Can set the URI of the token.
  • Functions: setURI()
• UPGRADER_ROLE: The upgrader role is the role that can upgrade the contract.
  • Responsibilities: Can upgrade the contract.
  • Functions: upgradeToAndCall()

Smart Contracts

AmbassadorNft.sol

This is the smart contract for the NFT that represents the membership of the community. I will give some explanation for the possible use cases and the functions of the NFT.

This contract is independent from other smart contracts in the current system.

Possible use cases and functions explanation

The NFT can be used to represent the membership of the community. For example, membership of A can be represented by NFT1155's id 0 and membership of B can be represented by NFT1155's id 1. Anyone who holds the NFT can be considered as the member of the community.

The default admin role has the right to set the minter and the burner role. The minter role is the role that can mint new tokens. The burner role is the role that can burn the tokens from the specified account.

There are functions to batch mint and batch burn the NFTs. With these functions, the minter and burner roles can easily mint and burn the NFTs for the members.

And the URI of the NFT can be set by the URI setter role after the deployment of the contract.

ERC20UpgradeableTokenV1.sol

This is the smart contract for the ERC20 token that is used to represent the utility token of the community. This utility token is transferable.

Use cases and functions explanation

This token is used as the utility token for the community, which can be earned by doing missions or other activities for the community. The users can use utility token to exchange the governance token.

The default admin role has the right to set the minter and the burner role. The minter role is the role that can mint new tokens. The burner role is the role that can burn the tokens from the specified account.

The contract itself is pausable. The pauser role is the role that can pause and unpause the contract. When the contract is paused, the minting and transferring of the token are disabled.

Notes

• The contract is upgradable, pausable, and ERC20Permit compliant.

GovToken.sol

This is the smart contract for the governance token of the community. The contract is based on the ERC20Votes contract of the OpenZeppelin. The contract also records the amount of utility token that one holder has burned.

Only the voting power exchange contract has the right to update the amount of utility token that one holder has burned.

Use cases and functions explanation

The token is used to represent the voting power of the holder. The token is not transferable. At the same time, it is also used to represent the level of the holder, e.g. the higher the level, the more voting power the holder has. For example, holding 1 token means the holder is level 2. Holding 0 token means the holder is level 1.

The token is not transferable. It means the token holder cannot transfer the token to any other address.

ERC20Permit is inherited here because OpenZeppelin's wizard is doing so and we followed its code, which is a relatively secure way in our opinion.

Notes

There are 2 phases when we want to utilize this token in the protocol. After kicking off as Phase 1, the community governance will be under observation. When phase 1 is stable and mature, we will transition into phase 2 gradually in the future.

• Phase 1: We use the token to represent the voting power of the holder. And manage governance off-chain using the token balance of the governance participants.

• Phase 2: We use the token to represent the voting power, i.e. level, of the holder. And manage governance on-chain using the token balance of the governance participants.

The GovToken is in a sense an achievement recorder. We want to make sure the achievement system is transparent and verifiable for all participants. That is why we did not make this token upgradable.

In fact, voting units in the token must be delegated to someone to be counted as actual voting power. The reason is mentioned in the documentation of OpenZeppelin contract.

In fact, voting units must be delegated in order to count as actual votes, and an account has to delegate those votes to itself if it wishes to participate in decisions and does not have a trusted representative.

VotingPowerExchange.sol

This contract is used to exchange the utility token for the governance token. The exchange is done by burning the governance token and minting the utility token.

The voting power exchange contract is the minter of the governance token and the burner of the utility token.

Use cases and functions explanation

The contract has several functions to calculate the amount governance token the holder deserve to get by burning the utility token that he has.

The main function is exchange(). It is the function that can only be called by the exchanger role. Exchanger role is the role that supposed to be managed by the protocol owner.

The function first checks the validity of the input which includes the sender's signature. The signature is generated off-chain and it can only be generated by the sender himself.

This makes sure that the sender himself has the intention to exchange such amount of token. In this way, we want to prevent the case that the exchanger role is abused.

Furthermore, the function checks the nonce and the expiration of the signature to make sure that the signature is fresh and valid.

Then it calculates the amount of the governance token that the holder deserve to get.

The calculation is based on the mathematical formula in the References section.

The contract sets a cap for the amount of the governance token that the holder can get.

If someone is below the cap and has the utility token to exchange more than the cap, the function will only exchange the amount of the token that the cap allows.

If someone has already reached the cap, the function will not allow the exchange.

No one is allowed to get more voting power than the cap.

After the calculation, the function will mint the governance token to the holder and burn the utility token from the holder.

The function also updates the amount of the utility token that the holder has burned in the GovToken contract.

Notes

• The contract is created from scratch.
• There are some variables which are used to for the precision of the calculation.
• SafeERC20 is not used because the token contract we are using is known to be safe.

DaoGovernor.sol

This is the smart contract for the DAO governance of the community. The contract is based on the Governor contract of OpenZeppelin.

This contract will be used in the Phase 2 of the community governance.

Use cases and functions explanation

• Basic governor functionality (proposal creation, voting, execution)
• Configurable governance settings (voting delay, voting period, proposal threshold)
• Integration with an ERC20Votes token for voting power
• Quorum requirements based on a fraction of total supply
• Timelock integration for delayed execution

Key features and parameters:

• Voting delay: 1 day (time between proposal creation and voting start)
  • can be changed later
• Voting period: 1 week (duration of the voting phase)
  • can be changed later
• Proposal threshold: 1e18 tokens (minimum tokens required to create a proposal)
  • can be changed later
• Quorum: 1% of total token supply (minimum participation for a valid vote)

Notes

• The contract is designed to work with a specific ERC20Votes token (likely the GovToken mentioned earlier) and a TimelockController.
• Some parameters (voting delay, voting period, proposal threshold, quorum) are hardcoded in the constructor for the set up when the contract is deployed.
• The contract uses OpenZeppelin's latest contracts (v5.0.0), ensuring up-to-date security features and best practices.
• This contract is supposed to be used when the community governance is ready to be fully decentralized in the phase 2 of the community governance.

Timelock.sol

The Timelock.sol contract is a time-lock controller based on OpenZeppelin's TimelockController.

This contract will be used in the Phase 2 of the community governance.

Use cases and functions explanation

Its main purposes and functionalities include:

1. Delayed Execution: Provides a mandatory waiting period for passed proposals, enhancing governance security.
2. Access Control: Manages which addresses can propose, execute, or cancel operations. If address(0) is set as the proposer or executor, then anyone can propose or execute.
3. Transparency: All pending operations are publicly viewable, giving community members time to review and react.

When the proposal is passed in the DaoGovernor, it will be queued in the timelock. After a predetermined delay, the actual execution is done by the timelock.

Notes

• The contract's admin role is set in the beginning and it is recommended to be revoked later.
• We suppose the executor role can be set as address(0) in the beginning which means anyone can execute. And the proposer role is set as the governor contract in the beginning. It means the governor contract only has the right to propose.
• Why we need to grant the timelock the minter role to mint gov token in the test case:
  • When the proposal is passed, the queue operation will be called and the actual called function of timelock is scheduledBatch(). After that, the DaoGovernor's execute() function can be called by anyone to execute the proposal. And this function will call the timelock's executeBatch() function to execute the proposal. The real executor is the timelock.

Governance flow

As the code is written in the test case of using the governance to mint some gov token to user A, the flow of the governance is as follows:

Preparation:

• User A has some voting power.

1. Prepare the values, targets, calldatas, and description of the proposal.
2. After a while, User A creates the proposal: daoGovernor.propose().
3. Some users cast votes for the proposal: daoGovernor.castVote().
4. The proposal is queued in the timelock: daoGovernor.queue().
5. After the delay, anyone can call this function: daoGovernor.execute().
6. The token is minted to User A.

About auditing

Scope

• src/
  • AmbassadorNft.sol
  • ERC20UpgradeableTokenV1.sol
  • GovToken.sol
  • VotingPowerExchange.sol
  • DaoGovernor.sol
  • Timelock.sol

Out of Scope

Any file except for the files in the above Scope.

Known issues

• Two step ownership transfer process is a known issue. We accept the risk of it.
• The precision loss in the calculation of the voting power and the burned token is existing but the precision loss will not be a problem because the value loss caused by it is very small, e.g. 1e9 token. It is ignorable.

Some notes

• Because we are using a mathematical formula(mentioned in the Reference section) which including square root calculation, some precision loss happens in the calculation. e.g. if we exchange 1e9 utility token for the governance token theoretically, what we get is zero token. And a user can spam the requests to make the system cost gas fee for no reason. In light of this, we made the value of the utility token to be 1e18 at least if someone wants to call the exchange function.
• Maybe the tests, also fuzz tests, are not able to cover all the edge cases. if you find any issues, please let us know.

Tests

The tests are written in the test/ directory. And it consists of the following tests:

• unit tests: test/unit/
• integration tests: test/integration/
• fuzz tests: test/fuzz/

More information about the tests is written in the test/readme.md. Please refer to it for more details about the tests.

The test coverage is 100% for the main contracts.

How to Start

1. Clone the repository

git clone https://github.com/codefox-inc/dao-community-contracts.git

2. Update the foundry dependencies by running

foundryup

3. Install the dependencies by running

make install

4. Compile the contracts by running

forge compile

5. Run the test by running

make test

6. Run the coverage by running

make coverage

7. Deploy the contracts on the base sepolia network by running

make deploy ARGS="--network basesepolia"

8. Deploy the nft contract on the base sepolia network by running

make deploy-nft ARGS="--network basesepolia"

References

Mathematical Formula and tables

These are the values we used in the exchange function and tests for voting power <-> burned token calculation.

x = (2 \* sqrt(306.25 + 30y) - 5) / 30 - 1
y = (15*x^2+35*x)/2

x: mintedToken
y: burnedToken

Minted Token (lvl)	Level	Burned Token
0	1	0
1	2	25
2	3	65
3	4	120
4	5	190
5	6	275
6	7	375
7	8	490
8	9	620
9	10	765
10	11	925
11	12	1100
12	13	1290
13	14	1495
14	15	1715
15	16	1950
16	17	2200
17	18	2465
18	19	2745
19	20	3040
20	21	3350
21	22	3675
22	23	4015
23	24	4370
24	25	4740
25	26	5125
26	27	5525
27	28	5940
28	29	6370
29	30	6815
30	31	7275
31	32	7750
32	33	8240
33	34	8745
34	35	9265
35	36	9800
36	37	10350
37	38	10915
38	39	11495
39	40	12090
40	41	12700
41	42	13325
42	43	13965
43	44	14620
44	45	15290
45	46	15975
46	47	16675
47	48	17390
48	49	18120
49	50	18865
50	51	19625
51	52	20400
52	53	21190
53	54	21995
54	55	22815
55	56	23650
56	57	24500
57	58	25365
58	59	26245
59	60	27140
60	61	28050
61	62	28975
62	63	29915
63	64	30870
64	65	31840
65	66	32825
66	67	33825
67	68	34840
68	69	35870
69	70	36915
70	71	37975
71	72	39050
72	73	40140
73	74	41245
74	75	42365
75	76	43500
76	77	44650
77	78	45815
78	79	46995
79	80	48190
80	81	49400
81	82	50625
82	83	51865
83	84	53120
84	85	54390
85	86	55675
86	87	56975
87	88	58290
88	89	59620
89	90	60965
90	91	62325
91	92	63700
92	93	65090
93	94	66495
94	95	67915
95	96	69350
96	97	70800
97	98	72265
98	99	73745
99	100	75240
100	101	76750
101	102	78275
102	103	79815
103	104	81370
104	105	82940
105	106	84525
106	107	86125
107	108	87740
108	109	89370
109	110	91015
110	111	92675

....

Documents

• Foundry Book
• OpenZeppelin

Some notes for Dev

1. All contracts must be deployed. After that we can connect it from the web2 side.
   1. What Phase 1 looks like is as the image below.
2. The main function which needs to be called by relayer on behalf of the user is the exchange() function.
   1. There is an exchanger role who is responsible for calling the exchange() function. He holds the utility token and the exchanger role in the votingPowerExchange contract. The exchanger holds the utility token on behalf of the user, so the exchanger will call the exchange() function using the signature of the user and send the token to the user to be used to mint the gov token in one transaction.
   2. In order to call it, the user needs to generate his own signature by signing with his private keys.
   3. The trusted relayer will then call the function with the signed message. Gas fee will be paid by the relayer instead of the user.
3. Some of the data is stored in the contract in nature. But the dev can decide if they want to store the data also in DB or not.
4. Some accounts with special roles are initialized in the contract in the beginning. Needless to say, the accounts with special roles are supposed to be handled very carefully.