A Home Assistant custom integration for control Dahua VTO/VTH devices.
Please ⭐️ this repo if you find it useful.
If you have questions or problems with this integration you can check this thread. If your model working but it's not in the supported list please share this information with community in the thread above.
The following models are reported as working:
- VTO2000
- VTO2101
- VTO2111
- VTO2202
- VTO2211
- VTO3211
- VTO3221
- VTO4202
- VTH1550
- VTH2421
- VTH5221
- VIP Vision INTIPRDSDB (rebranded VTO2111)1
- VIP Vision INTIPMONDW (rebranded VTH5221)1
Folowing models should work:
Following models may work:
- VTO12xx, VTO6xxx, VTO6221
- VTH15xx, VTH16xx, VTH2201, VTH5222, VTH5341, VTH5421
- VTS5240
The easiest way to install the integration is with HACS. First install HACS if you don't have it yet. After installation you can find this integration in the HACS store under integrations.
Alternatively, you can install it manually. Just copy the dahua_vto folder and all of its contents into your Home Assistant's custom_components folder. This is often located inside of your /config folder. If you are running Hass.io, use SAMBA to copy the folder over. If you are running Home Assistant Supervised, the custom_components folder might be located at /usr/share/hassio/homeassistant. It is possible that your custom_components folder does not exist. If that is the case, create the folder in the proper location, and then copy the dahua_vto folder and all of its contents inside the newly created custom_components folder. The disadvantage of a manual installation is that you won't be notified about updates.
Add the following to your configuration.yaml file:
sensor:
- platform: dahua_vto
name: NAME_HERE
host: HOST_HERE
timeout: TIMEOUT_HERE optional, default 10
port: PORT_HERE optional, default 5000
username: USERNAME_HERE_OR_secrets.yaml
password: PASSWORD_HERE_OR_secrets.yaml
scan_interval: SCAN_INTERVAL_HERE optional, default 60 - platform: dahua_vto
name: Dahua VTO
host: 192.168.1.2
username: admin
password: password
scan_interval: 5Note: If you change a name of integration name: Dahua VTO, you should change entity_id: sensor.dahua_vto in example to your sensor name which you can found in Home Assistant Developer Tools.
timer:
door_lock:
name: Door Lock
icon: mdi:timer
lock:
- platform: template
name: Door Lock
value_template: "{{ not is_state('timer.door_lock', 'active') }}"
optimistic: false
lock:
unlock:
- service: dahua_vto.open_door
data_template:
entity_id: sensor.dahua_vto
channel: 1
short_number: HA- alias: Dahua VTO All Events
mode: queued
trigger:
- platform: event
event_type: dahua_vto
action:
- service: persistent_notification.create
data:
title: "{{ trigger.event.data.Code if trigger.event.data.Code is defined else 'Unknown Code' }}"
message: "{{ trigger.event.data }}"
- alias: Dahua VTO Command Result
mode: queued
trigger:
- platform: event
event_type: dahua_vto
condition:
- condition: template
value_template: "{{ trigger.event.data.method is defined }}"
action:
- service: persistent_notification.create
data:
title: "{{ trigger.event.data.method }}"
message: "{{ trigger.event.data }}"
- alias: Dahua VTO
mode: queued
trigger:
- platform: event
event_type: dahua_vto
event_data:
Code: BackKeyLight
action:
- choose:
- conditions: >
{{ trigger.event.data.Data.State | int in [0, 1, 2, 5, 6] }}
sequence:
- service: persistent_notification.create
data:
title: "{{ 'Doorbell Ring' if trigger.event.data.Data.State | int in [1, 2] else 'Doorbell No Ring' }}"
message: "{{ trigger.event.data }}"
- conditions: >
{{ trigger.event.data.Data.State | int == 8 }}
sequence:
- service: timer.start
data:
entity_id: timer.door_lock
duration: 00:00:02 # VTO Unlock Period
- service: persistent_notification.create
data:
title: Unlock
message: "{{ trigger.event.data }}"
- conditions: >
{{ trigger.event.data.Data.State | int == 9 }}
sequence:
- service: persistent_notification.create
data:
title: Unlock failed
message: "{{ trigger.event.data }}"
- conditions: >
{{ trigger.event.data.Data.State | int == 11 }}
sequence:
- service: persistent_notification.create
data:
title: Device rebooted
message: "{{ trigger.event.data }}"
default:
- service: persistent_notification.create
data:
title: "Unknown state {{ trigger.event.data.Data.State | int }}"
message: "{{ trigger.event.data }}"Thanks to @mate for this example. Here you can also find door open/close events examples received from Dahua VTO.
template:
- trigger:
- platform: event
event_type: dahua_vto
event_data:
Code: DoorStatus
binary_sensor:
- name: VTO Door Status
state: "{{ trigger.event.data.Data.Status | string == 'Open' }}"
device_class: doorYou can send any command using the service dahua_vto.send_command or dahua_vto.send_instance_command and receive reply as event.
dahua_vto.send_instance_command sequential call to service.factory.instance, service.method with object returned by factory.instance and service.destroy, where service it's a first part of the method before .. Result of service.method returned as event.
I doesn't found documentation but you can grab some commands and their parameters from Dahua-JSON-Debug-Console-v2.py
All device client.notifyEventStream and client.notifyConfigChange messages you will receive as events, information about some of them you can find here.
For most of the cases you can use BackKeyLight event State, the list of some of them you can found in table below.
Possible that in your case the State will be different and this depends from the device model.
| State | Description |
|---|---|
| 0 | Normal state, No Call/Ring |
| 1, 2 | Call/Ring |
| 4 | Voice message |
| 5 | Call answered from VTH |
| 6 | Call not answered |
| 7 | VTH calling VTO |
| 8 | Unlock |
| 9 | Unlock failed |
| 11 | Device rebooted |
service: dahua_vto.send_command
data:
entity_id: sensor.dahua_vto
method: system.listService
service: dahua_vto.send_command
data:
entity_id: sensor.dahua_vto
method: magicBox.listMethod
service: dahua_vto.send_command
data:
entity_id: sensor.dahua_vto
method: magicBox.reboot
params: {delay: 60}
tag: alert
service: dahua_vto.send_command
data:
entity_id: sensor.dahua_vto
method: magicBox.getBootParameter
params: {names: ['serverip', 'ver']}
# Make VTO Call
service: dahua_vto.send_command
data:
entity_id: sensor.dahua_vto
method: console.runCmd
params: {'command': 'call 9901'}
event: false
# Cancel VTO Call
service: dahua_vto.send_command
data:
entity_id: sensor.dahua_vto
method: console.runCmd
params: {'command': 'hc'}
event: false
# Clear VTH Call Records
service: dahua_vto.send_instance_command
data:
entity_id: sensor.dahua_vth
method: RecordUpdater.clear
instance_params: {'name': 'VideoTalkMissedLog'}
event: false
# Arming the VTH alarm
service: dahua_vto.send_command
data:
entity_id: sensor.dahua_vth
method: configManager.setConfig
params: {'table': {'AlarmEnable': true, 'CurrentProfile': 'Outdoor'}, 'name': 'CommGlobal'}
event: false
# Disarming the VTH alarm
service: dahua_vto.send_command
data:
entity_id: sensor.dahua_vth
method: configManager.setConfig
params: {'table': {'AlarmEnable': false, 'CurrentProfile': 'AtHome'}, 'name': 'CommGlobal'}
event: false
# Getting the VTH alarm status
service: dahua_vto.send_command
data:
entity_id: sensor.dahua_vth
method: configManager.getConfig
params: {'name': 'CommGlobal'}
event: trueWhenever you write a bug report, it helps tremendously if you include debug logs directly (otherwise we will just ask for them and it will take longer). So please enable debug logs like this and include them in your issue:
logger:
default: warning
logs:
custom_components.dahua_vto: debug- @mcw0 Dahua-JSON-Debug-Console-v2.py
- @Antori91 Dahua-VTH-SecPanel.py
- Dahua intercom - API
- ftp://ftp.asm.cz/Dahua/videovratni