[epaper_spi] Add SSD1677 and Seeed EE04 with Waveshare 4.26

content/components/display/epaper_spi.md

@@ -12,7 +12,7 @@ with improved state management and non-blocking operation. This component implem
 queue-based state machine that eliminates blocking waits for the busy pin and provides
 better integration with ESPHome's async architecture.
 
-The communication method uses 4-wire [SPI](/components/spi), so you need to have an `spi:` section in your
+The communication method uses [SPI](/components/spi), so you need to have an `spi:` section in your
 configuration.
 
 The driver supports a number of displays and there are also specific configurations for ESP32 boards with integrated displays.
@@ -28,40 +28,51 @@ display:
 
 ## Supported displays
 
-| Model name             | Manufacturer | Product Description                                        |
-| ---------------------- | ------------ | ---------------------------------------------------------- |
-| Spectra-E6             | Eink         | <https://www.eink.com/brand/detail/Spectra6>               |
-| Seeed-reTerminal-E1002 | Seeed Studio | <https://www.seeedstudio.com/reTerminal-E1002-p-6533.html> |
+| Model name             | Manufacturer | Product Description                                                                                                        |
+| ---------------------- |--------------|----------------------------------------------------------------------------------------------------------------------------|
+| Spectra-E6             | Eink         | <https://www.eink.com/brand/detail/Spectra6>                                                                               |
+| Seeed-reTerminal-E1002 | Seeed Studio | <https://www.seeedstudio.com/reTerminal-E1002-p-6533.html>                                                                 |
+| SSD1677                | Solomon      | <https://www.solomon-systech.com/product/ssd1677/>                                                                         |
+| Seeed-ee04-mono-4.26   | Seeed Studio | Seeed EE04 board with Waveshare 4.26" mono epaper. <https://www.seeedstudio.com/XIAO-ePaper-Display-Board-EE04-p-6560.html> |
 
 ## Configuration variables
 
 When using a model defining an integrated ESP32 display board most of the configuration such as the pins and dimensions will be set by default,
 but can be overridden if needed.
 
-- **model** (**Required**): The model of the ePaper display. See the table above for options.
+- **model** (**Required**): The model of the ePaper display. See the table above for options (case is not significant).
 - **cs_pin** (**Required**, [Pin Schema](/guides/configuration-types#pin-schema)): The CS pin. Predefined for integrated boards.
 - **dc_pin** (**Required**, [Pin Schema](/guides/configuration-types#pin-schema)): The DC pin. Predefined for integrated boards.
 - **busy_pin** (*Optional*, [Pin Schema](/guides/configuration-types#pin-schema)): The BUSY pin, if used.
 - **reset_pin** (*Optional*, [Pin Schema](/guides/configuration-types#pin-schema)): The RESET pin, if used.
   Make sure you pull this pin high (by connecting it to 3.3V with a resistor) if not connected to a GPIO pin.
+- **dimensions** (**Required**, dict): Dimensions of the screen, specified either as *width* **x** *height* (e.g `320x240`  )
+  or with separate config keys. For models with full pre-defined configuration this is optional and will be preset by
+  the model selected. The dimensions are specified in pixels, and the width and height must be greater than 0.
 
-- **rotation** (*Optional*): Set the rotation of the display. Everything you draw in `lambda:` will be rotated
+  - **height** (**Required**, int): Specifies height of display.
+  - **width** (**Required**, int): Specifies width of display.
+
+- **rotation** (*Optional*, int): Set the rotation of the display. Everything you draw in `lambda:` will be rotated
   by this option. One of `0°` (default), `90°`, `180°`, `270°`.
+- **transform** (*Optional*, dict): If `rotation` is not sufficient, use this to transform the display. Options are:
+  - **mirror_x** (**Required**, boolean): If true, mirror the x axis.
+  - **mirror_y** (**Required**, boolean): If true, mirror the y axis.
 
 - **reset_duration** (*Optional*, [Time](/guides/configuration-types#time)): Duration for the display reset operation. Defaults to `200ms`.
-
 - **lambda** (*Optional*, [lambda](/automations/templates#config-lambda)): The lambda to use for rendering the content on the display.
   See [Display Rendering Engine](/components/display#display-engine) for more information.
 - **pages** (*Optional*, list): Show pages instead of a single lambda. See [Display Pages](/components/display#display-pages).
-
 - **update_interval** (*Optional*, [Time](/guides/configuration-types#time)): The interval to re-draw the screen. Defaults to `60s`,
   use `never` to only manually update the screen via `component.update`.
-- **spi_id** (*Optional*, [ID](/guides/configuration-types#id)): Manually specify the ID of the [SPI Component](/components/spi) if you want
-  to use multiple SPI buses.
+- **full_update_every** (*Optional*, int): On screens that support partial updates, this sets the number of updates
+  before a full update is forced. Defaults to `1` which will make every update a full update.
+- **spi_id** (*Optional*, [ID](/guides/configuration-types#id)): Required to specify the ID of the [SPI Component](/components/spi) if your
+  configuration defines multiple SPI buses. If only a single SPI bus is configured, this is optional.
 - **id** (*Optional*, [ID](/guides/configuration-types#id)): Manually specify the ID used for code generation.
 
 ## See Also
 
-- {{< docref "index/" >}}
 - {{< apiref "epaper_spi/epaper_spi.h" "epaper_spi/epaper_spi.h" >}}
 - [ESPHome Display Rendering Engine](/components/display#display-engine)
+- {{< docref "components/lvgl" >}}