- Introduction
- System Requirements
- Hardware Requirements
- Recommended Operating Systems
- Software Requirements
- Useful Software
- Preparation
- Workstation Preparation (Linux)
- Workstation Preparation (macOS)
- Installation And Configuration
- Flame 2025 Installation
- Post Flame 2025 Installation
- Configure Flame Preferences
- LOGIK-PROJEKT Installation
- Running LOGIK-PROJEKT
- Troubleshooting Permissions and Python
- Application Tree
- Disclaimer
LOGIK-PROJEKT is a toolset for the creation & lifecycle management of projekts for Autodesk Flame 2025 and newer.
The tools were developed with Autodesk Flame 2025+, Python 3.11, & PySide 6.
- Linux or macOS workstation, capable of running Autodesk Flame 2025+
- Autodesk Flame 2025
- /PROJEKTS - (root level symbolic link for PROJEKT storage)
# Check Static HostName (equivalent to macOS HostName)
hostnamectl status | grep "Static hostname"
# Check Transient HostName (equivalent to macOS LocalHostName)
hostnamectl status | grep "Transient hostname"
# Check Pretty HostName (equivalent to macOS ComputerName)
hostnamectl status | grep "Pretty hostname"
# Set the Static HostName (equivalent to macOS HostName)
sudo hostnamectl set-hostname <new-static-hostname>
# Set the Transient HostName (equivalent to macOS LocalHostName)
sudo hostnamectl set-hostname <new-transient-hostname> --transient
# Set Pretty HostName (equivalent to macOS ComputerName)
sudo hostnamectl set-hostname "<new-pretty-hostname>" --pretty
# Create a test directory for LOGIK-PROJEKTS:
sudo mkdir -p -m 777 /home/shared/PROJEKTS
# Link /PROJEKTS to test PROJEKTS directory:
sudo ln -s /home/shared/PROJEKTS /PROJEKTS
# Reboot workstation:
sudo reboot
# Check HostName (equivalent to Linux Static hostname)
scutil --get HostName
# Check LocalHostName (equivalent to Linux Transient HostName)
scutil --get LocalHostName
# Check ComputerName (equivalent to Linux Pretty HostName)
scutil --get ComputerName
# Set the HostName (equivalent to Linux Static hostname)
sudo scutil --set HostName <new-hostname>
# Set LocalHostName (equivalent to Linux Transient HostName)
sudo scutil --set LocalHostName <new-local-hostname>
# Set ComputerName (equivalent to Linux Pretty HostName)
sudo scutil --set ComputerName <new-computer-name>
# Create a test directory for LOGIK-PROJEKTS:
sudo mkdir -p -m 777 /Users/Shared/PROJEKTS
# Create /etc/synthetic.conf to link /PROJEKTS to test PROJEKTS directory:
echo "PROJEKTS System/Volumes/Data/Users/Shared/PROJEKTS" | sudo tee /etc/synthetic.conf
(The whitespace between PROJEKTS and the path MUST BE A TAB, NOT WHITESPACE)
# Reboot workstation:
sudo reboot
# (Linux)
# upgrade operating system
# install DKU
# install flame 2025
# create a stone called 'stonefs'
# (macOS)
# upgrade operating system
# install flame 2025
# create a stone called 'stonefs'
# (Linux)
# start flame
# license the application
# create a test project
# (macOS)
# start flame
# license the application
# create a test project
# You may need to enable these applications in:
# System Preferences | Privacy & Security | Full Disk Access
# DLmpd
# Flame
# ifffsWiretapServer
# Python3.11
# swdb
# sw_dbd
# sw_serverd
# Terminal
# Visual StudioCode
# wiretapgateway
User Tokens tab
├── set User Name
└── set User Nickname
Timeline tab
├── set Default Shot Name to:
└── <name>_<background segment###>0
Batch/BFX Tab
├── set Default batch iteration name to
└── <batch name>_v<iteration####>_<workstation>_<user nickname>
Media Panel Tab
├── set Batch shelf to 1
├── set Reel Group to 2
├── set Show Batch iterations (first column)
└── set Desktop Column: Set to “Copy From/To Batch”
# Download or fork the release version of the LOGIK-PROJEKT repository
# from: https://github.com/flamelogik/LOGIK-PROJEKT
# to: /path/to/your/home/workspace/GitHub/
mkdir -p -m 775 ~/workspace/GitHub/
cd ~/workspace/GitHub/
git clone [email protected]:flamelogik/LOGIK-PROJEKT.git
# Change to the LOGIK-PROJEKT directory
cd ~/workspace/GitHub/LOGIK-PROJEKT
# Establish the path to the current Autodesk Flame Python installation
install/get_current_adsk_python.sh
# Create Desktop Applications for LOGIK-PROJEKT
install/create_desktop_apps.sh
# On Linux, look in the Activities menu for LOGIK-PROJEKT.
# Add the desktop launcher to your favorites.
# Double click the desktop launcher to run LOGIK-PROJEKT.
# On macOS, look in the LOGIK-PROJEKT folder for the LOGIK-PROJEKT.app.
# Add the LOGIK-PROJEKT.app to your dock.
# Double click the LOGIK-PROJEKT.app to run LOGIK-PROJEKT.
# There may be permission errors on your PROJEKTS directory.
# Check that the permissions on your PROJEKTS directory are 777.
# Errors have been seen on Rocky Linux 8.7 and macOS 13 related to python:
# On Rocky Linux 8.7 errors have been seen related to python3.6.
# On macOS 13 errors have been seen related to python3.9.
# Possible Solutions:
1. Install the Desired Python Version:
- First, ensure you have the desired Python version installed.
- For example, to install Python 3.11:
```bash
sudo dnf install python3.11
```
2. Configure Alternatives:
- Add the new Python version to the alternatives system:
```bash
sudo alternatives --install /usr/bin/python3 python3 /usr/bin/python3.6 1
sudo alternatives --install /usr/bin/python3 python3 /usr/bin/python3.11 2
```
3. Select the Default Python Version:
- Use the `alternatives` command to choose the default Python version:
```bash
sudo alternatives --config python3
```
You will see a list of installed Python versions.
Select the number corresponding to Python 3.11.
4. Verify the Change:
- Check the Python version to ensure the switch was successful:
```bash
python3 --version
```
LOGIK-PROJEKT/
│
├── docs/ # Documentation
│
├── install/ # Installation scripts
│ │
│ └── logs/ # Installation logs
│
├── modules/ # Python modules
│ │
│ ├── functions/ # Python Functions
│ │ │
│ │ ├── backup/ # Backup functions
│ │ ├── create/ # Create functions
│ │ ├── export/ # Export functions
│ │ ├── get/ # Get functions
│ │ ├── link/ # Link functions
│ │ ├── run/ # Run functions
│ │ ├── scratch/ # Scratch functions
│ │ ├── shell/ # Shell functions
│ │ ├── string/ # String functions
│ │ ├── synchronize/ # Synchronize functions
│ │ ├── update/ # Update functions
│ │ └── wiretap/ # Wiretap functions
│ │
│ ├── version/ # Scripts Version
│ |
│ └── widgets/ # Widgets
│ │
│ ├── combo_box/ # Combo box widgets
│ ├── layout/ # Layout widgets
│ ├── line_edit/ # Line edit widgets
│ └── style_sheet/ # Style sheet widgets
│
└── resources/ # Resources
│
├── cfg/ # Configuration files
│ │
│ ├── nuke/ # Foundry Nuke configuration
│ │
│ └── projekt_configuration/ # Projekt configuration
│ │
│ ├── bookmarks/ # Bookmarks
│ ├── parameters/ # Parameters
│ ├── roots/ # Roots
│ └── tree/ # Tree
│
├── docstrings/ # Docstrings
│
├── flame/ # Flame Resources
│ │
│ ├── opencolorio/ # OpenColorIO
│ | │
│ │ └── ocio_scripts/ # OCIO scripts
│ │
│ ├── presets/ # Flame Presets
│ │ |
│ │ ├── batch/ # Batch presets
│ │ ├── bookmarks/ # Bookmark presets
│ │ ├── burn_metadata/ # Burn metadata presets
│ │ ├── cfg/ # Configuration presets
│ │ ├── export/ # Export presets
│ │ ├── import/ # Import presets
│ │ ├── mediahub/ # Mediahub presets
│ │ ├── media_import/ # Media import presets
│ │ ├── mediaImport/ # MediaImport presets
│ │ ├── overlays/ # Overlays presets
│ │ └── status/ # Status presets
│ │
│ ├── python/ # Flame Python
│ │ |
│ │ └── logik_projekt/ # Logik Projekt Python
│ │ │
│ │ ├── openclip_tools/ # OpenClip tools
│ │ │
│ │ └── projekt_tools/ # Projekt tools
│ │
│ ├── Syncolor/ # Syncolor Presets
│ │ |
│ │ └── Shared/ # Shared presets
│ │ |
│ │ ├── policies/ # Syncolor policies
│ │ |
│ │ └── transforms/ # Syncolor transforms
│ │ |
│ │ └── flame_colortoolkit/ # Flame ColorToolkit
│ │
│ └── templates/ # Flame Templates
│
├── icons/ # Application icons
│
├── tmp/ # Temporary files
│
├── utilities/ # Application utilities
│ │
│ └── flame_configs/ # Flame configurations
│ |
│ └── init_config/ # Init configuration
│
├── version/ # Application version
│
└── www/ # HTML files
This file is part of LOGIK-PROJEKT.
Copyright © 2024 man-made-mekanyzms
LOGIK-PROJEKT creates directories, files, scripts & tools for use with
Autodesk Flame and other software.
LOGIK-PROJEKT is free software.
You can redistribute it and/or modify it under the terms of the
GNU General Public License as published by the Free Software Foundation,
either version 3 of the License, or any later version.
This program is distributed in the hope that it will be useful,
but
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program.
If not, see <https://www.gnu.org/licenses/>.
Contact: [email protected]
