GAIA

GAIA setup guide:

• NOT: Dün Sei ile hermes'i göstermiştim ancak bir çok kişi hata alıyor bundan dolayı şu an GAIA ile gösteriyorum.

• NOT: GAIA'nız yoksa ilk başta GAIA kuralım.

• NOT: İster aynı sunucuya ister farklı sunucuya.. Benim sunucumda 20-30 GB yer kapladı.

• NOT: Düşük bir sunucunuz varsa farklı sunucuya kurun.

• NOT: Ben gaia kurmak ıstemıyorum var olan nodelara kurmak istiyorsanız SEİ-STRIDE hermes floodu dün yazmıştım buradan bulabilirsiniz.

• EN ÖNEMLİ NOT: Ekip GAIA istiyor.

Validator adımızı düzenleyelim:

NODENAME=RuesValidator

Değişkenleri kaydedelim:

GAIA_PORT=23
echo "export NODENAME=$NODENAME" >> $HOME/.bash_profile
if [ ! $WALLET ]; then
	echo "export WALLET=wallet" >> $HOME/.bash_profile
fi
echo "export GAIA_CHAIN_ID=GAIA" >> $HOME/.bash_profile
echo "export GAIA_PORT=${GAIA_PORT}" >> $HOME/.bash_profile
source $HOME/.bash_profile

Güncellemeler:

sudo apt update && sudo apt upgrade -y

sudo apt install curl build-essential git wget jq make gcc tmux chrony -y

Go kurulumu:

• Not: go kurdunuz mu kurmadınız mı bılmıyorum belki sıfır sunucuya kuruyorsunuz GAIA'yı. go version ile kontrol edebilirsiniz.

if ! [ -x "$(command -v go)" ]; then
  ver="1.18.2"
  cd $HOME
  wget "https://golang.org/dl/go$ver.linux-amd64.tar.gz"
  sudo rm -rf /usr/local/go
  sudo tar -C /usr/local -xzf "go$ver.linux-amd64.tar.gz"
  rm "go$ver.linux-amd64.tar.gz"
  echo "export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin" >> ~/.bash_profile
  source ~/.bash_profile
fi

Binary:

cd $HOME
git clone https://github.com/Stride-Labs/gaia.git
cd gaia
git checkout 5b47714dd5607993a1a91f2b06a6d92cbb504721
make build
sudo cp $HOME/gaia/build/gaiad /usr/local/bin

config

gaiad config chain-id $GAIA_CHAIN_ID
gaiad config keyring-backend test
gaiad config node tcp://localhost:${GAIA_PORT}657

İnit:

gaiad init $NODENAME --chain-id $GAIA_CHAIN_ID

genesis ve addrbook:

wget -qO $HOME/.gaia/config/genesis.json "https://raw.githubusercontent.com/mmc6185/node-testnets/main/stride/GAIA/genesis.json"
wget -qO $HOME/.gaia/config/addrbook.json "https://raw.githubusercontent.com/mmc6185/node-testnets/main/stride/GAIA/addrbook.json"

Seed ve peerler ve bağlantılar:

SEEDS=""
PEERS="[email protected]:23656,[email protected]:23656,[email protected]:26656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:26256,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656,[email protected]:23656"
sed -i -e "s/^seeds *=.*/seeds = \"$SEEDS\"/; s/^persistent_peers *=.*/persistent_peers = \"$PEERS\"/" $HOME/.gaia/config/config.toml

sed -i.bak -e "s%^proxy_app = \"tcp://127.0.0.1:26658\"%proxy_app = \"tcp://127.0.0.1:${GAIA_PORT}658\"%; s%^laddr = \"tcp://127.0.0.1:26657\"%laddr = \"tcp://127.0.0.1:${GAIA_PORT}657\"%; s%^pprof_laddr = \"localhost:6060\"%pprof_laddr = \"localhost:${GAIA_PORT}060\"%; s%^laddr = \"tcp://0.0.0.0:26656\"%laddr = \"tcp://0.0.0.0:${GAIA_PORT}656\"%; s%^prometheus_listen_addr = \":26660\"%prometheus_listen_addr = \":${GAIA_PORT}660\"%" $HOME/.gaia/config/config.toml
sed -i.bak -e "s%^address = \"tcp://0.0.0.0:1317\"%address = \"tcp://0.0.0.0:${GAIA_PORT}317\"%; s%^address = \":8080\"%address = \":${GAIA_PORT}080\"%; s%^address = \"0.0.0.0:9090\"%address = \"0.0.0.0:${GAIA_PORT}090\"%; s%^address = \"0.0.0.0:9091\"%address = \"0.0.0.0:${GAIA_PORT}091\"%" $HOME/.gaia/config/app.toml

Pruning (bence yapın yer kaplamasın)

pruning="custom"
pruning_keep_recent="100"
pruning_keep_every="0"
pruning_interval="50"
sed -i -e "s/^pruning *=.*/pruning = \"$pruning\"/" $HOME/.gaia/config/app.toml
sed -i -e "s/^pruning-keep-recent *=.*/pruning-keep-recent = \"$pruning_keep_recent\"/" $HOME/.gaia/config/app.toml
sed -i -e "s/^pruning-keep-every *=.*/pruning-keep-every = \"$pruning_keep_every\"/" $HOME/.gaia/config/app.toml
sed -i -e "s/^pruning-interval *=.*/pruning-interval = \"$pruning_interval\"/" $HOME/.gaia/config/app.toml

Gerekli ayarlar:

sed -i -e "s/^minimum-gas-prices *=.*/minimum-gas-prices = \"0uatom\"/" $HOME/.gaia/config/app.toml

sed -i -e "s/prometheus = false/prometheus = true/" $HOME/.gaia/config/config.toml

gaiad tendermint unsafe-reset-all --home $HOME/.gaia

Servis dosyası:

sudo tee /etc/systemd/system/gaiad.service > /dev/null <<EOF
[Unit]
Description=gaia
After=network-online.target
[Service]
User=$USER
ExecStart=$(which gaiad) start --home $HOME/.gaia
Restart=on-failure
RestartSec=3
LimitNOFILE=65535
[Install]
WantedBy=multi-user.target
EOF

Başlatalım:

sudo systemctl daemon-reload
sudo systemctl enable gaiad
sudo systemctl restart gaiad && sudo journalctl -u gaiad -f -o cat

Hızlı eşleşmek için state sync:

• Burası 5 dakikada sürebilir 1 saatte, talebe bağlı.

SNAP_RPC1="https://gaia.poolparty.stridenet.co:445" \
&& SNAP_RPC2="https://gaia.poolparty.stridenet.co:445"
LATEST_HEIGHT=$(curl -s $SNAP_RPC2/block | jq -r .result.block.header.height) \
&& BLOCK_HEIGHT=$((LATEST_HEIGHT - 2000)) \
&& TRUST_HASH=$(curl -s "$SNAP_RPC2/block?height=$BLOCK_HEIGHT" | jq -r .result.block_id.hash)
sed -i.bak -E "s|^(enable[[:space:]]+=[[:space:]]+).*$|\1true| ; \
s|^(rpc_servers[[:space:]]+=[[:space:]]+).*$|\1\"$SNAP_RPC1,$SNAP_RPC2\"| ; \
s|^(trust_height[[:space:]]+=[[:space:]]+).*$|\1$BLOCK_HEIGHT| ; \
s|^(trust_hash[[:space:]]+=[[:space:]]+).*$|\1\"$TRUST_HASH\"|" $HOME/.gaia/config/config.toml
gaiad tendermint unsafe-reset-all --home $HOME/.gaia
sudo systemctl restart gaiad && journalctl -fu gaiad -o cat

Eşleşirken cüzdan

• Cüzdan oluşturduktan sonra faucettan ATOM alın.

• İster yeni oluşturun:

gaiad keys add $WALLET

• İsterseniz Stride cüzdanınızı kullanın:

gaiad keys add $WALLET --recover

Validator oluşturun ve explorerden kontrol edin.

• Eşleşmeden validator oluşturmayın
• Explorer Link

gaiad tx staking create-validator \
  --amount 1000000uatom \
  --from Rues \
  --commission-max-change-rate "0.01" \
  --commission-max-rate "0.2" \
  --commission-rate "0.07" \
  --min-self-delegation "1" \
  --pubkey  $(gaiad tendermint show-validator) \
  --moniker RuesValidator \
  --chain-id GAIA