Home Assistant OS 14.2

Home Assistant Operating System

• Make usb_modeswitch include directory writable (#3800) @sairon
• Fix linux-pam trying to include disabled pam_lastlog.so on login (#3815) @sairon
• Bump Buildroot to 2024.02.10 (#3811) @sairon

Raspberry Pi

• Disable CQE on mmc0 to fix I/O freezes on CM5 (#3793) @sairon
• Add all BCM2712 device trees to RPi 5 image (#3782) @sairon
• Change RPi bootargs order to keep cgroup memory controller enabled (#3772) @sairon

Home Assistant Yellow

• Change RPi bootargs order to keep cgroup memory controller enabled (#3772) @sairon

Home Assistant Green

• Linux: Update kernel to 6.6.73 (#3813) @sairon
• Remove unapplied BRCM_TRACING option from Rockchip kernel config (#3754) @sairon

Open Virtual Appliance

• Enable ES1371 sound card module for VMWare guests (#3799) @sairon
• Linux: Update kernel to 6.6.73 (#3813) @sairon
• Add Mellanox ConnectX-3 NIC support (#3775) @greyltc

Generic x86-64

• Linux: Update kernel to 6.6.73 (#3813) @sairon
• Add Mellanox ConnectX-3 NIC support (#3775) @greyltc

Hardkernel ODROID

⚠️ The kernel update introduced a regression on ODROID-M1 and ODROID-M1S which results in USB 3 and NVMe ports not being functional. If you are using an M.2 drives or USB 3 ports, do not update to OS 14.2. The update has been withdrawn from the release channel for these boards.

• Linux: Update kernel to 6.6.73 (#3813) @sairon
• Remove unapplied BRCM_TRACING option from Rockchip kernel config (#3754) @sairon

ASUS Tinker

• Linux: Update kernel to 6.6.73 (#3813) @sairon
• Remove Z3FOLD option from Tinker kernel config (#3755) @sairon

Khadas VIM Series

• Allow boot from USB and NVMe on Khadas VIM3 (#3784) @viraniac
• Linux: Update kernel to 6.6.73 (#3813) @sairon

Generic aarch64

• Enable AMD 1-wire AXI IP and Zynq GPIO drivers (#3795) @michalsimek
• Enable USB-SD convertor on AMD/Xilinx Kria KD240 platform (#3812) @michalsimek
• Linux: Update kernel to 6.6.73 (#3813) @sairon

Build System

• Bump docker/build-push-action from 6.10.0 to 6.11.0 (#3791) @dependabot
• Bump docker/build-push-action from 6.11.0 to 6.12.0 (#3809) @dependabot