Keychron Q7 - 🚧 Custom QMK firmware

⚠️ Disclaimer

Caution

This is a custom firmware that could break your keyboard.

🛑 Use at your own risk! 🛑

I have tried my best to make sure everything works, but I may miss something.

It works for my keyboard, but there may be revisions in the future that are not compatible. Use at your own risk!

🥳Thanks!

Thanks to the Keychron team for providing fully working code! This was super easy to get started with and add my modifications.

🖥️ Compiling

You can use QMK builder with the following command:

qmk compile -j 0 -kb keychron/q7/ansi -km iamdanielv

the -j 0 uses parallel build to speed it up a bit

qmk should generate a new bin file: keychron_q7_ansi_iamdanielv.bin in your qmk_firmware folder.

For me it was: C:\Users\<USER>\qmk_firmware\keychron_q7_ansi_iamdanielv.bin

🎉 Conclusion and Next Steps

That's it! You now should be able to flash the custom firmware using qmk toolbox.

Let me know if you have any questions. I can be reached at @IAmDanielV or @iamdanielv.bsky.social.