1.3.1
Features:
- Same new Features like in Version 1.3.0 but with disabled Wifi functionality. It can be easily enabled by uncommenting #define SERIAL_PORT_2 in Configuration.h file.
Bugfixes:
- Some users reported USB communication issues when using Octoprint in combination with a USB Webcam. By disabling the Wifi functionality, this issue could be fixed so far.
Known Issues:
- The Mega Pro Laser is currently nor supported at all.
- When setting the Z offset manually, the Nozzle does not move to give you "live feedback". The Offset is only applied after X/Y movement.
- The Nozzle temperature can only be set over 260°C via gcode and not the Touchscreen. This issue can not be fixed.
- On Mega X with original DWIN/DGUS II Display, the pause/resume/filament change feature does not work due to a bug in the TFT Firmware itself.
- The gcode filetransfer via Wifi is pretty slow due to to hardware limitations.
- In some cases, Octoprint loses the USB connection. If this happens, just disable the internal Wifi feature.
How to Install:
- Follow the Beginner's Guide which is also available in german as "Einsteiger Leitfaden".
- Read the FAQ which can also be found in the Wiki.
- If you own a MEGA S or MEGA PRO, set your Bed size in your Slicer to these values.
- Use Cura, PrusaSlicer or xLoader to flash the Firmware to your Printer.