v01.10.01.50-ls62

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.01.50-ls62/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

This is a hotfix version based on 1.10.0

Bugs Fixed

1. Fixed Crashes During STEP File Import:Resolved an issue where some users experienced crashes when importing STEP files. We also improved the UI for the STEP import parameter settings panel to avoid layout issues on some Mac models. Special thanks to @benjaminkott for identifying and helping resolve this issue.(#5816 ,#5819 ,#5192 ,#5198,#5199 ,#5197 ,#5203 ,#5208 ,#5210 ,#5218 ,#5222 ,#5225 ,#5243 ,#5248)
2. Improved Performance on Intel Mac After Slicing:Fixed an issue where the interface response time slowed significantly after slicing on some Mac models with Intel CPUs. Special thanks to @HO44-PROJECT, @northdakota and other users for their assistance and verification. We also added an “Enable multi instance rendering by OpenGL” option in Preferences; if you still experience performance drops, try disabling this option.(#5194 ,#5237 ,#5200 ,#5247 ,#5244 ,#5223 )

3. Fixed Printer Temperature Display Delay:Resolved an issue where the printer’s temperature display was incorrect or delayed.(#5216,#5196)
4. Improved Stop Printing Popup Message:Updated the message in the stop printing popup for clearer communication.

5. Disabled Default Scarf Seam Option:Based on our tests of the Scarf Seam effect and optimal parameters for PLA materials, the Scarf Seam feature and some parameters were initially set as filament attributes and enabled by default for most PLA materials in the V1.10.0 Public Release. However, after release, it was observed that contour angle detection may vary depending on the model, causing inconsistent seam quality along the Z-axis. As shown below, areas with the Scarf Seam applied had a smoother surface, while regions without it displayed inferior quality. The seam inconsistencies at the border between regions created an uneven surface effect. In the future versions, we will optimize the Scarf Seam function to maintain consistent outer surface print quality along a single line.

Due to these issues, Scarf Seam is temporarily disabled by default. If you want to use Scarf Seam, please enable it on the Filament settings page. If you encounter an uneven Scarf Seam, try lowering the 'Scarf application angle threshold' or disabling the 'Smart scarf seam application' to improve the result.

6. Resolved an issue where the color of STL files became abnormal after splitting them into separate objects.(#5201)
7. Resolved an issue where the pause printing feature occasionally failed to work.(#5253 ,#5275)

v01.10.01.50-ls61

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.01.50-ls61/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

This is a hotfix version based on 1.10.0

Bugs Fixed

1. Fixed Crashes During STEP File Import:Resolved an issue where some users experienced crashes when importing STEP files. We also improved the UI for the STEP import parameter settings panel to avoid layout issues on some Mac models. Special thanks to @benjaminkott for identifying and helping resolve this issue.(#5816 ,#5819 ,#5192 ,#5198,#5199 ,#5197 ,#5203 ,#5208 ,#5210 ,#5218 ,#5222 ,#5225 ,#5243 ,#5248)
2. Improved Performance on Intel Mac After Slicing:Fixed an issue where the interface response time slowed significantly after slicing on some Mac models with Intel CPUs. Special thanks to @HO44-PROJECT, @northdakota and other users for their assistance and verification. We also added an “Enable multi instance rendering by OpenGL” option in Preferences; if you still experience performance drops, try disabling this option.(#5194 ,#5237 ,#5200 ,#5247 ,#5244 ,#5223 )

3. Fixed Printer Temperature Display Delay:Resolved an issue where the printer’s temperature display was incorrect or delayed.(#5216,#5196)
4. Improved Stop Printing Popup Message:Updated the message in the stop printing popup for clearer communication.

5. Disabled Default Scarf Seam Option:Based on our tests of the Scarf Seam effect and optimal parameters for PLA materials, the Scarf Seam feature and some parameters were initially set as filament attributes and enabled by default for most PLA materials in the V1.10.0 Public Release. However, after release, it was observed that contour angle detection may vary depending on the model, causing inconsistent seam quality along the Z-axis. As shown below, areas with the Scarf Seam applied had a smoother surface, while regions without it displayed inferior quality. The seam inconsistencies at the border between regions created an uneven surface effect. In the future versions, we will optimize the Scarf Seam function to maintain consistent outer surface print quality along a single line.

Due to these issues, Scarf Seam is temporarily disabled by default. If you want to use Scarf Seam, please enable it on the Filament settings page. If you encounter an uneven Scarf Seam, try lowering the 'Scarf application angle threshold' or disabling the 'Smart scarf seam application' to improve the result.

6. Resolved an issue where the color of STL files became abnormal after splitting them into separate objects.(#5201)
7. Resolved an issue where the pause printing feature occasionally failed to work.(#5253 ,#5275)

v01.10.00.89-ls61

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.00.89-ls61/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

This is the official public release of Bambu Studio v1.10.0.
Please see the release logs of 1.10 Public Beta and 1.10 Public Beta2 for the complete list of changes with respect to 1.9.7.
The full release notes of 1.10.0 can also be found here: https://wiki.bambulab.com/en/software/bambu-studio/release/release-note-1-10-0

Feature

1.Added MakerWorld Search Box on Homepage.

2. Added Print History at the Bottom of Homepage: A new print history section has been introduced, allowing for easy tracking and review of past print records.

Improvements

1. Enhanced Project Link Functionality: Clicking on project links within "Projects" now redirects to the MakerWorld page, and project descriptions can now be copied. (Model from @SwoopsyPoo)
   
2. Ukrainian Translation Update: Special thanks to @iZonex for the updated Ukrainian translation.
3. Build Improvements: Addressed several build issues, thanks to contributions from @hadess and @dankamongmen .
4. New QiDi Printer Profile: Thanks to @HYzd766 for contributing the configuration for new QiDi machines.

Bugs Fixed

1. Resolved errors in auto-orientation at specific angles.（#5092）
2. Fixed a potential collision issue when printing items ’By-Object‘.（#4804）
3. Corrected an issue where navigating to specific layers could fail. （#4957, #5170）
4. Addressed a crash issue when connecting in cross-subnet mode.（#5135）
5. Fixed synchronization problems with the AMS in certain cases. （#5181, #4863, #4949）

v01.09.07.52-ls60

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.09.07.52-ls60/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841

v01.09.07.52-ls59

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841

v01.09.07.52-ls58

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841

v01.09.07.52-ls57

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841

v01.09.07.52-ls56

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841

v01.09.07.50-ls55

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

This is the public official release of Bambu Studio v1.9.7.

Improvement

1. Liveview will automatically pause after 15 minutes of inactivity by default to conserve energy and reduce data usage. This feature can be disabled in 'Preferences-Media-Keep liveview when printing'. bambulab/BambuStudio#4690

2. Optimized the file sent to the printer, excluding irrelevant data that is not essential to printing. For MakerWorld models with complex printing guidlines, this optimization significantly reduces the storage consuption and file sending time.

3. Added support for spiral Z hop out of timelapse mode to prevent potential nozzle collisions and reduce stringing issues on A1/A1 mini. Special thanks to @ziehmon. bambulab/BambuStudio#3423

4. Added slice time display for each plate in 'All Plates Stats'.

5. Added model repair service for MacOS Bambu Studio users. Huge thanks to https://www.formware.co/onlinestlrepair for permission to access the service.

6. Polish language support has been added. bambulab/BambuStudio#4491 bambulab/BambuStudio#4360
7. New updates for Turkish translations and thanks to @fatih5228 for your job.
8. Added statistics for filament usage in GCode, including total weight, volume, and length.Thanks to @THE-SIMPLE-MARK.
   bambulab/BambuStudio#3072
9. Updated the Icon for Archimedean Chords. Thanks @MarkussLugia for the awesome job.
10. Keep the dialog window open after creating or editing custom filaments.

Bugfix

1. Fixed an issue causing significant layering and poor print quality due to line width errors in Arachne mode in version 1.9.5.(model from adriancubas)

2. Fixed the bug where no flushing GCode was generated when the flushing amount was small.bambulab/BambuStudio#4738
3. Fix the problem of no retraction after extruding compensation in A1/A1 mini.
4. Add X1E to the PPA-CF preset.
5. Fix the height_to_lid of A1 mini.
6. Fix AMS mapping issue including crash.
7. Fixed an issue where the Home tab content could be incorrectly occupied when users opened new tabs under the MakerWorld tab in Studio. Studio now consistently opens these new tabs in the local browser.

v01.09.07.52-ls54

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841