The I2CSPI01 module is designed for systems where a microcontroller with only an I2C interface needs to communicate with one or more SPI peripherals. It acts as a bridge that translates I2C commands into SPI signals, allowing integration of SPI devices such as ADCs, DACs, memory chips, or sensors into an I2C-based architecture. This simplifies wiring and reduces the number of required signals.
- I2C to SPI bridge based on SC18IS602B
- Supports up to four SPI slave devices
- Unused chip-select pins configurable as GPIO
- SPI clock modes: 0, 1, 2, 3
- SPI speed configurable: 58 kHz to 1.843 MHz
- GPIOs support multiple modes: quasi-bidirectional, push-pull, input-only, open-drain
- 200-byte internal buffer
- Operates as I2C slave and SPI master
- 3.3V supply voltage
| Parameter | Value |
|---|---|
| Power Supply | Max. 3.6 V |
| Dimensions | 40.13 x 30.00 x 16 mm |
| Interface | I2C (up to 400 kHz), SPI (up to 1.843 MHz) |
| IC Used | SC18IS602B |
- One via must be drilled due to a PCB short.
- J5 header is not functional due to PCB layout issue.