Camtrap

This project provides the ability to create a DIY home monitoring system. Each device will automatically detect movement within a certain distance, taking a photo and saving it to a central server when triggered. Devices can be enabled or disabled remotely via the server, or physically with an RFID-tag.

Parts List

This project requires the following parts:

• ESP32 Freenove WROVER CAM Module
• STM32 Nucleo-64
• Wires

Setup

To setup this project, follow the following guides in order:

1. Server
2. Device
3. ESP32

User Manual

Recording RFID tag

1. Navigate to the page of the device you want to use to add an RFID tag
2. Enable configure mode
3. Swipe the RFID tag against the reading panel
4. Navigate to the RFID tags page and verify that the tag has been navigated
5. Navigate back to the device page and disable configure mode