Update zlib and minizip to v1.3.1

ExternData/Resources/C-Sources/minizip/ioapi.h

@@ -144,7 +144,7 @@ typedef long     (ZCALLBACK *tell_file_func)      (voidpf opaque, voidpf stream)
 typedef long     (ZCALLBACK *seek_file_func)      (voidpf opaque, voidpf stream, uLong offset, int origin);
 
 
-/* here is the "old" 32 bits structure structure */
+/* here is the "old" 32 bits structure */
 typedef struct zlib_filefunc_def_s
 {
     open_file_func      zopen_file;

ExternData/Resources/C-Sources/minizip/unzip.c

@@ -117,7 +117,7 @@
 const char unz_copyright[] =
    " unzip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll";
 
-/* unz_file_info_interntal contain internal info about a file in zipfile*/
+/* unz_file_info64_internal contain internal info about a file in zipfile*/
 typedef struct unz_file_info64_internal_s
 {
     ZPOS64_T offset_curfile;/* relative offset of local header 8 bytes */
@@ -450,7 +450,7 @@ local ZPOS64_T unz64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib
     if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK)
         return CENTRALDIRINVALID;
 
-    /* number of the disk with the start of the zip64 end of  central directory */
+    /* number of the disk with the start of the zip64 end of central directory */
     if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK)
         return CENTRALDIRINVALID;
     if (uL != 0)
@@ -497,9 +497,9 @@ local unzFile unzOpenInternal(const void *path,
     ZPOS64_T central_pos;
     uLong   uL;
 
-    uLong number_disk;          /* number of the current dist, used for
+    uLong number_disk;          /* number of the current disk, used for
                                    spanning ZIP, unsupported, always 0*/
-    uLong number_disk_with_CD;  /* number the the disk with central dir, used
+    uLong number_disk_with_CD;  /* number the disk with central dir, used
                                    for spanning ZIP, unsupported, always 0*/
     ZPOS64_T number_entry_CD;      /* total number of entries in
                                    the central dir

ExternData/Resources/C-Sources/minizip/unzip.h

@@ -306,7 +306,7 @@ extern int ZEXPORT unzGetCurrentFileInfo(unzFile file,
   Get Info about the current file
   if pfile_info!=NULL, the *pfile_info structure will contain some info about
         the current file
-  if szFileName!=NULL, the filemane string will be copied in szFileName
+  if szFileName!=NULL, the filename string will be copied in szFileName
             (fileNameBufferSize is the size of the buffer)
   if extraField!=NULL, the extra field information will be copied in extraField
             (extraFieldBufferSize is the size of the buffer).

ExternData/Resources/C-Sources/zlib/ChangeLog

@@ -1,6 +1,16 @@
 
                 ChangeLog file for zlib
 
+Changes in 1.3.1 (22 Jan 2024)
+- Reject overflows of zip header fields in minizip
+- Fix bug in inflateSync() for data held in bit buffer
+- Add LIT_MEM define to use more memory for a small deflate speedup
+- Fix decision on the emission of Zip64 end records in minizip
+- Add bounds checking to ERR_MSG() macro, used by zError()
+- Neutralize zip file traversal attacks in miniunz
+- Fix a bug in ZLIB_DEBUG compiles in check_match()
+- Various portability and appearance improvements
+
 Changes in 1.3 (18 Aug 2023)
 - Remove K&R function definitions and zlib2ansi
 - Fix bug in deflateBound() for level 0 and memLevel 9

ExternData/Resources/C-Sources/zlib/FAQ

@@ -14,8 +14,7 @@ The latest zlib FAQ is at http://zlib.net/zlib_faq.html
  2. Where can I get a Windows DLL version?
 
     The zlib sources can be compiled without change to produce a DLL.  See the
-    file win32/DLL_FAQ.txt in the zlib distribution.  Pointers to the
-    precompiled DLL are found in the zlib web site at http://zlib.net/ .
+    file win32/DLL_FAQ.txt in the zlib distribution.
 
  3. Where can I get a Visual Basic interface to zlib?
 

ExternData/Resources/C-Sources/zlib/README

@@ -1,6 +1,6 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.3 is a general purpose data compression library.  All the code is
+zlib 1.3.1 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
@@ -31,7 +31,7 @@ Mark Nelson <[email protected]> wrote an article about zlib for the Jan.  1997
 issue of Dr.  Dobb's Journal; a copy of the article is available at
 https://marknelson.us/posts/1997/01/01/zlib-engine.html .
 
-The changes made in version 1.3 are documented in the file ChangeLog.
+The changes made in version 1.3.1 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory contrib/ .
 
@@ -83,7 +83,7 @@ Acknowledgments:
 
 Copyright notice:
 
- (C) 1995-2023 Jean-loup Gailly and Mark Adler
+ (C) 1995-2024 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages

ExternData/Resources/C-Sources/zlib/deflate.c

@@ -1,5 +1,5 @@
 /* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2023 Jean-loup Gailly and Mark Adler
+ * Copyright (C) 1995-2024 Jean-loup Gailly and Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -52,7 +52,7 @@
 #include "deflate.h"
 
 const char deflate_copyright[] =
-   " deflate 1.3 Copyright 1995-2023 Jean-loup Gailly and Mark Adler ";
+   " deflate 1.3.1 Copyright 1995-2024 Jean-loup Gailly and Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -493,7 +493,7 @@ int ZEXPORT deflateInit2_(z_streamp strm, int level, int method,
      * symbols from which it is being constructed.
      */
 
-    s->pending_buf = (uchf *) ZALLOC(strm, s->lit_bufsize, 4);
+    s->pending_buf = (uchf *) ZALLOC(strm, s->lit_bufsize, LIT_BUFS);
     s->pending_buf_size = (ulg)s->lit_bufsize * 4;
 
     if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
@@ -503,8 +503,14 @@ int ZEXPORT deflateInit2_(z_streamp strm, int level, int method,
         deflateEnd (strm);
         return Z_MEM_ERROR;
     }
+#ifdef LIT_MEM
+    s->d_buf = (ushf *)(s->pending_buf + (s->lit_bufsize << 1));
+    s->l_buf = s->pending_buf + (s->lit_bufsize << 2);
+    s->sym_end = s->lit_bufsize - 1;
+#else
     s->sym_buf = s->pending_buf + s->lit_bufsize;
     s->sym_end = (s->lit_bufsize - 1) * 3;
+#endif
     /* We avoid equality with lit_bufsize*3 because of wraparound at 64K
      * on 16 bit machines and because stored blocks are restricted to
      * 64K-1 bytes.
@@ -720,9 +726,15 @@ int ZEXPORT deflatePrime(z_streamp strm, int bits, int value) {
 
     if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
     s = strm->state;
+#ifdef LIT_MEM
+    if (bits < 0 || bits > 16 ||
+        (uchf *)s->d_buf < s->pending_out + ((Buf_size + 7) >> 3))
+        return Z_BUF_ERROR;
+#else
     if (bits < 0 || bits > 16 ||
         s->sym_buf < s->pending_out + ((Buf_size + 7) >> 3))
         return Z_BUF_ERROR;
+#endif
     do {
         put = Buf_size - s->bi_valid;
         if (put > bits)
@@ -1294,7 +1306,7 @@ int ZEXPORT deflateCopy(z_streamp dest, z_streamp source) {
     ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
     ds->prev   = (Posf *)  ZALLOC(dest, ds->w_size, sizeof(Pos));
     ds->head   = (Posf *)  ZALLOC(dest, ds->hash_size, sizeof(Pos));
-    ds->pending_buf = (uchf *) ZALLOC(dest, ds->lit_bufsize, 4);
+    ds->pending_buf = (uchf *) ZALLOC(dest, ds->lit_bufsize, LIT_BUFS);
 
     if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
         ds->pending_buf == Z_NULL) {
@@ -1305,10 +1317,15 @@ int ZEXPORT deflateCopy(z_streamp dest, z_streamp source) {
     zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
     zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos));
     zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos));
-    zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
+    zmemcpy(ds->pending_buf, ss->pending_buf, ds->lit_bufsize * LIT_BUFS);
 
     ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
+#ifdef LIT_MEM
+    ds->d_buf = (ushf *)(ds->pending_buf + (ds->lit_bufsize << 1));
+    ds->l_buf = ds->pending_buf + (ds->lit_bufsize << 2);
+#else
     ds->sym_buf = ds->pending_buf + ds->lit_bufsize;
+#endif
 
     ds->l_desc.dyn_tree = ds->dyn_ltree;
     ds->d_desc.dyn_tree = ds->dyn_dtree;
@@ -1539,13 +1556,21 @@ local uInt longest_match(deflate_state *s, IPos cur_match) {
  */
 local void check_match(deflate_state *s, IPos start, IPos match, int length) {
     /* check that the match is indeed a match */
-    if (zmemcmp(s->window + match,
-                s->window + start, length) != EQUAL) {
-        fprintf(stderr, " start %u, match %u, length %d\n",
-                start, match, length);
+    Bytef *back = s->window + (int)match, *here = s->window + start;
+    IPos len = length;
+    if (match == (IPos)-1) {
+        /* match starts one byte before the current window -- just compare the
+           subsequent length-1 bytes */
+        back++;
+        here++;
+        len--;
+    }
+    if (zmemcmp(back, here, len) != EQUAL) {
+        fprintf(stderr, " start %u, match %d, length %d\n",
+                start, (int)match, length);
         do {
-            fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
-        } while (--length != 0);
+            fprintf(stderr, "(%02x %02x)", *back++, *here++);
+        } while (--len != 0);
         z_error("invalid match");
     }
     if (z_verbose > 1) {

ExternData/Resources/C-Sources/zlib/deflate.h

@@ -1,5 +1,5 @@
 /* deflate.h -- internal compression state
- * Copyright (C) 1995-2018 Jean-loup Gailly
+ * Copyright (C) 1995-2024 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -23,6 +23,10 @@
 #  define GZIP
 #endif
 
+/* define LIT_MEM to slightly increase the speed of deflate (order 1% to 2%) at
+   the cost of a larger memory footprint */
+/* #define LIT_MEM */
+
 /* ===========================================================================
  * Internal compression state.
  */
@@ -217,7 +221,14 @@ typedef struct internal_state {
     /* Depth of each subtree used as tie breaker for trees of equal frequency
      */
 
+#ifdef LIT_MEM
+#   define LIT_BUFS 5
+    ushf *d_buf;          /* buffer for distances */
+    uchf *l_buf;          /* buffer for literals/lengths */
+#else
+#   define LIT_BUFS 4
     uchf *sym_buf;        /* buffer for distances and literals/lengths */
+#endif
 
     uInt  lit_bufsize;
     /* Size of match buffer for literals/lengths.  There are 4 reasons for
@@ -239,7 +250,7 @@ typedef struct internal_state {
      *   - I can't count above 4
      */
 
-    uInt sym_next;      /* running index in sym_buf */
+    uInt sym_next;      /* running index in symbol buffer */
     uInt sym_end;       /* symbol table full when sym_next reaches this */
 
     ulg opt_len;        /* bit length of current block with optimal trees */
@@ -318,6 +329,25 @@ void ZLIB_INTERNAL _tr_stored_block(deflate_state *s, charf *buf,
   extern const uch ZLIB_INTERNAL _dist_code[];
 #endif
 
+#ifdef LIT_MEM
+# define _tr_tally_lit(s, c, flush) \
+  { uch cc = (c); \
+    s->d_buf[s->sym_next] = 0; \
+    s->l_buf[s->sym_next++] = cc; \
+    s->dyn_ltree[cc].Freq++; \
+    flush = (s->sym_next == s->sym_end); \
+   }
+# define _tr_tally_dist(s, distance, length, flush) \
+  { uch len = (uch)(length); \
+    ush dist = (ush)(distance); \
+    s->d_buf[s->sym_next] = dist; \
+    s->l_buf[s->sym_next++] = len; \
+    dist--; \
+    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
+    s->dyn_dtree[d_code(dist)].Freq++; \
+    flush = (s->sym_next == s->sym_end); \
+  }
+#else
 # define _tr_tally_lit(s, c, flush) \
   { uch cc = (c); \
     s->sym_buf[s->sym_next++] = 0; \
@@ -337,6 +367,7 @@ void ZLIB_INTERNAL _tr_stored_block(deflate_state *s, charf *buf,
     s->dyn_dtree[d_code(dist)].Freq++; \
     flush = (s->sym_next == s->sym_end); \
   }
+#endif
 #else
 # define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
 # define _tr_tally_dist(s, distance, length, flush) \

ExternData/Resources/C-Sources/zlib/gzguts.h

@@ -1,5 +1,5 @@
 /* gzguts.h -- zlib internal header definitions for gz* operations
- * Copyright (C) 2004-2019 Mark Adler
+ * Copyright (C) 2004-2024 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -210,9 +210,5 @@ char ZLIB_INTERNAL *gz_strwinerror(DWORD error);
 /* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
    value -- needed when comparing unsigned to z_off64_t, which is signed
    (possible z_off64_t types off_t, off64_t, and long are all signed) */
-#ifdef INT_MAX
-#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
-#else
 unsigned ZLIB_INTERNAL gz_intmax(void);
-#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
-#endif
+#define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())

ExternData/Resources/C-Sources/zlib/gzlib.c

@@ -1,5 +1,5 @@
 /* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004-2019 Mark Adler
+ * Copyright (C) 2004-2024 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -563,20 +563,20 @@ void ZLIB_INTERNAL gz_error(gz_statep state, int err, const char *msg) {
 #endif
 }
 
-#ifndef INT_MAX
 /* portably return maximum value for an int (when limits.h presumed not
    available) -- we need to do this to cover cases where 2's complement not
    used, since C standard permits 1's complement and sign-bit representations,
    otherwise we could just use ((unsigned)-1) >> 1 */
 unsigned ZLIB_INTERNAL gz_intmax(void) {
-    unsigned p, q;
-
-    p = 1;
+#ifdef INT_MAX
+    return INT_MAX;
+#else
+    unsigned p = 1, q;
     do {
         q = p;
         p <<= 1;
         p++;
     } while (p > q);
     return q >> 1;
-}
 #endif
+}

ExternData/Resources/C-Sources/zlib/inflate.c

@@ -1387,7 +1387,7 @@ int ZEXPORT inflateSync(z_streamp strm) {
     /* if first time, start search in bit buffer */
     if (state->mode != SYNC) {
         state->mode = SYNC;
-        state->hold <<= state->bits & 7;
+        state->hold >>= state->bits & 7;
         state->bits -= state->bits & 7;
         len = 0;
         while (state->bits >= 8) {

ExternData/Resources/C-Sources/zlib/inftrees.c

@@ -1,5 +1,5 @@
 /* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2023 Mark Adler
+ * Copyright (C) 1995-2024 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.3 Copyright 1995-2023 Mark Adler ";
+   " inflate 1.3.1 Copyright 1995-2024 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -57,7 +57,7 @@ int ZLIB_INTERNAL inflate_table(codetype type, unsigned short FAR *lens,
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 198, 203};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 203, 77};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,

ExternData/Resources/C-Sources/zlib/inftrees.h

@@ -41,8 +41,8 @@ typedef struct {
    examples/enough.c found in the zlib distribution.  The arguments to that
    program are the number of symbols, the initial root table size, and the
    maximum bit length of a code.  "enough 286 9 15" for literal/length codes
-   returns returns 852, and "enough 30 6 15" for distance codes returns 592.
-   The initial root table size (9 or 6) is found in the fifth argument of the
+   returns 852, and "enough 30 6 15" for distance codes returns 592. The
+   initial root table size (9 or 6) is found in the fifth argument of the
    inflate_table() calls in inflate.c and infback.c.  If the root table size is
    changed, then these maximum sizes would be need to be recalculated and
    updated. */