A set of interacting microservices, representing a very basic banking system.
- This project is a development of a small set of Spring Boot projects, with a database in-memory.
I analysed this repository according to the clean code standards on Better Code Hub just to get an independent opinion of how bad the code is. Surprisingly, the compliance score is high!
- I have used GitHub projects to manage my tasks in the Harvest Bank project. Project Link
- All MVP tasks are assigned to the Harvest Bank MVP Milestone . Milestone Link
- I used Pull requests to manages and close my tasks. Tasks Link
- Finally, I have added releases to manage small features sprints until the final release v1.5. Releases Link
Let's explain first the system structure to understand its components:
Harvest-Bank --> Parent folder.
|- docs --> All docs and diagrams.
|- bank-base
|- bank-build-chassis --> Super Parent POM, contains all build information, plugins and tools.
|- bank-service-chassis --> Parent POM, inherits from build chassis contains all microservices common libraries.
|-bank-common --> API Endpoint and services definitions for all microservices, and common utilities shared between all components
|-bank-services
|- account-service --> Account Microservice
|- customer-service --> Customer Microservice
|- transaction-service --> Transaction Microservice
|- run-em-all.sh --> Run all microservices in separate mode.
|- setup.sh --> Install all shared POMs and shared libraries.
|- stop-em-all.sh --> Stop all services runs in standalone mode.
|- test-em-all.sh --> This will start all Microservices landscape and test them, then shutdown Microservices after test finishes (use switch start and stop)
Now, as we have learned about different system components, then let's start.
The following are the initially required software pieces:
- Maven: Apache Maven is a software project management and comprehension tool, it can be downloaded from here https://maven.apache.org/download.cgi
- Git: it can be downloaded and installed from https://git-scm.com/downloads
- Java, JDK 15 RC: it can be downloaded and installed from https://jdk.java.net/15/
- curl: this command-line tool for testing HTTP-based APIs can be downloaded and installed from https://curl.haxx.se/download.html
- jq: This command-line JSON processor can be downloaded and installed from https://stedolan.github.io/jq/download/
Follow the installation guide for each software website link and check your software versions from the command line to verify that they are all installed correctly.
I recommend that you work with your Java code using an IDE that supports the development of Spring Boot applications such as Spring Tool Suite or IntelliJ IDEA Ultimate Edition.
So you can use the Spring Boot Dashboard to run the services, run each Microservice test case, and many more.
All you have to do is just fire up your favorit IDE -> open or import the parent
folder Harvest-Bank, and everything will be ready for you.
The first thing to do is to open git bash command line, and then simply you can clone the project under any of your favorite places as the following:
> git clone https://github.com/mohamed-taman/Harvest-Bank.gitTo build and run the test cases for each service & shared modules in the project, we need to do the following:
This done only for the first time or any new changes or versions of shared modules and POMs.
To build and install bank-build-chassis, and bank-services-chassis POMs, and bank-common
shared library, from the root folder Harvest-Bank, run the following command:
mohamed_taman:Harvest-Bank$ ./setup.shNow you should expect output like this:
Installing all Harvest Bank core shared modules & Parent POMs
...............................................................
1- Installing [Parent Build Chassis] module...
Done successfully.
2- Installing shared [Services Utilities] module...
Done successfully.
3- Installing [Parent Services Chassis] module...
Done successfully.
Woohoo, building & installing all project modules are finished successfully.
The project is ready for the next step. :)Now it is the time to build our 3 microservices and run each service unit and integration tests in isolation by running the following commands:
mohamed_taman:Harvest-Bank$ ./mvnw clean verifyAll build commands and test suite for each microservice should run successfully, and the final output should be like this:
-------< org.siriusxi.blueharvest.bank:Harvest-Bank-aggregator >--------
[INFO] Building Harvest Bank Aggregator 1.0-SNAPSHOT [7/7]
[INFO] --------------------------------[ pom ]---------------------------------
[INFO]
[INFO] --- maven-clean-plugin:2.5:clean (default-clean) @ Harvest-Bank-aggregator ---
[INFO] ------------------------------------------------------------------------
[INFO] Reactor Summary:
[INFO]
[INFO] Harvest Bank Build Chassis 1.0-SNAPSHOT ............ SUCCESS [ 0.131 s]
[INFO] Bank Common 0.0.1-SNAPSHOT ......................... SUCCESS [ 1.917 s]
[INFO] Bank Services Chassis 1.0-SNAPSHOT ................. SUCCESS [ 0.335 s]
[INFO] Customer Service 0.0.1-SNAPSHOT .................... SUCCESS [ 9.717 s]
[INFO] Account Service 0.0.1-SNAPSHOT ..................... SUCCESS [ 8.175 s]
[INFO] Transaction Service 0.0.1-SNAPSHOT ................. SUCCESS [ 8.421 s]
[INFO] Harvest Bank Aggregator 1.0-SNAPSHOT ............... SUCCESS [ 0.032 s]
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 28.964 s
[INFO] Finished at: 2020-09-07T14:13:11+02:00
[INFO] ------------------------------------------------------------------------Now it's the time to run all of our Microservices, and it's straightforward, just run the following commands:
mohamed_taman:Harvest-Bank$ ./run-em-all.shAll the services, In-memory databases, will run in parallel in a detach mode, and the command output will print the following to console:
Starting [Harvest Bank] μServices ....
---------------------------------------
Starting [account-service] μService.... Done
Starting [customer-service] μService.... Done
Starting [transaction-service] μService.... DoneYou can manually test the whole system through Customer Service APIs within its OpenAPI interface at the following URL http://localhost:8090/swagger-ui.html
- If you execute get customers through
/bank/api/v1/customers, it will return pre-defined seven customers. - If you tried to pass through
/bank/api/v1/customers/{id}/accountsthe following:- A none exist customer {Id} system will return 404 (Not Found) with error message.
- A minus customer {Id} or Initial Credit, System will return 422 (Unprocessable Entity) with an error message.
- An invalid format customer {Id} or Initial Credit, System will return 400 (Bad Request) with an error message.
- If the initial credit is 0.0, the system expects to create an account and no transaction.
- If the initial credit is > 0.0, i.e., 100, The system is expected to create a new account with a balance of 100. A new transaction with the amount of 100 and customer balance will be 100.
- Suppose another create account call happened to the same customer. In that case, the system will do what is done at point #4. The customer balance will be updated to reflect the sum of all accounts balances and transaction amounts.
Now it's the time to stop all of our Microservices, and it's straightforward, just run the following commands:
mohamed_taman:Harvest-Bank$ ./stop-em-all.shAll the services will shutdown, and the command output will print to the following to console:
Stopping [Harvest Bank] μServices ....
---------------------------------------
Stopping μService at port 8090 ....
{"message":"Shutting down, bye..."}
μService at port 8090 stopped successfully ....
Stopping μService at port 8091 ....
{"message":"Shutting down, bye..."}
μService at port 8091 stopped successfully ....
Stopping μService at port 8092 ....
{"message":"Shutting down, bye..."}
μService at port 8092 stopped successfully ....Now it's time to test all the application functionality as one part. To do so just run the following automation test script:
mohamed_taman:Harvest-Bank$ ./test-em-all.sh start stopYou can use stop switch with start, that will
- Start the whole microservices landscape,
- Run the system black-box tests, if successful then
- Stop the whole microservices.
The result will look like this:
Starting 'Harvest Bank μServices' for [end-2-end] testing....
Start Tests: Mon Sep 7 17:27:09 CEST 2020
HOST=localhost
PORT=8090
Firing up the test environment...
Starting [Harvest Bank] μServices ....
---------------------------------------
Starting [account-service] μService.... Done
Starting [customer-service] μService.... Done
Starting [transaction-service] μService.... Done
Wait for: curl http://localhost:8090/actuator/health ... , retry #1 , retry #2 , retry #3 , retry #4 {"status":"UP","components":{"db":{"status":"UP","details":{"database":"H2","validationQuery":"isValid()"}},"diskSpace":{"status":"UP","details":{"total":1000345825280,"free":610842566656,"threshold":10485760,"exists":true}},"ping":{"status":"UP"}}}
DONE, continues...
Test OK (HTTP Code: 200)
Test OK (actual value: 7)
Test OK (actual value: 0)
Test OK (actual value: 0)
Test OK (HTTP Code: 404, {"status":"NOT_FOUND","message":"No Customer found for id {14}","timestamp":"2020-09-07@17:27:22.914+0200"})
Test OK (HTTP Code: 422, {"status":"UNPROCESSABLE_ENTITY","message":"Invalid data (Customer Id= 14, initialCredit= -10.00)","timestamp":"2020-09-07@17:27:22.961+0200"})
Test OK (HTTP Code: 400, {"timestamp":"2020-09-07T15:27:22.985+00:00","status":400,"error":"Bad Request","message":"Failed to convert value of type 'java.lang.String' to required type 'int'; nested exception is java.lang.NumberFormatException: For input string: \"invalidCustomerId\"","path":"/bank/api/v1/customers/invalidCustomerId/accounts"})
Test OK (actual value: "Bad Request")
Test OK (HTTP Code: 200)
Test OK (HTTP Code: 200)
Test OK (actual value: 1)
Test OK (actual value: 0)
Test OK (actual value: 0)
Test OK (HTTP Code: 200)
Test OK (HTTP Code: 200)
Test OK (actual value: 100.2)
Test OK (actual value: 2)
Test OK (actual value: 100.2)
Test OK (actual value: 1)
Test OK (actual value: 100.2)
Test OK (HTTP Code: 200)
Test OK (HTTP Code: 200)
Test OK (actual value: 200)
Test OK (actual value: 3)
Test OK (actual value: 99.8)
Test OK (actual value: 1)
Test OK (actual value: 99.8)
End, all tests OK: Mon Sep 7 17:27:24 CEST 2020
We are done, stopping the test environment...
Stopping [Harvest Bank] μServices ....
---------------------------------------
Stopping μService at port 8090 ....
{"message":"Shutting down, bye..."}
μService at port 8090 stopped successfully ....
Stopping μService at port 8091 ....
{"message":"Shutting down, bye..."}
μService at port 8091 stopped successfully ....
Stopping μService at port 8092 ....
{"message":"Shutting down, bye..."}
μService at port 8092 stopped successfully .... Finally, hope you enjoyed the application and find it useful. If you would like to enhance please open PR, and finally give it a 🌟.
Happy Coding 😊
Copyright (C) 2020 Mohamed Taman, Licensed under the Apache-2.0 License.