v1.13.5b2

If your inverter is not running the latest manager version, you may need to select your manager version in the integration settings. See the wiki for details.

Inverter	Supported by default	Selectable in settings
H1 G1 / AC1 / AIO	All
H1 G2	v1.44	All
H3	v1.80	All
AIO-H3	v1.01	All
H3 Pro	v1.22	All
KH / KA	v1.33	All

🪲 Fixes

• Support AIO-H3 versions before v1.01 (#779) @FozzieUK

v1.13.5b1

If your inverter is not running the latest manager version, you may need to select your manager version in the integration settings. See the wiki for details.

Inverter	Supported by default	Selectable in settings
H1 G1 / AC1 / AIO	All
H1 G2	v1.44	All
H3	v1.80	All
H3-AIO	1.82	-
H3 Pro	v1.22	All
KH / KA	v1.33	All

Note that H3 and H3 Pro users may have to select/update their firmware version in the settings, see above!

🚀 Features

• Add cell_temp_low, cell_temp_high, cell_mV_low, cell_mV_high, kwh_remaining, battery_soh to H3 v1.80+ (#777) @FozzieUK
• Add battery_soh to H1-G2 v1.44+ (#777) @FozzieUK
• Add battery_soh to KH v1.33+ (#777) @FozzieUK

🪲 Fixes

• Fix display of firmware versions and rfreq for H3 Pro v1.22+ (#777) @FozzieUK

v1.13.4

If your inverter is not running the latest manager version, you may need to select your manager version in the integration settings. See the wiki for details.

Inverter	Supported by default	Selectable in settings
H1 G1 / AC1 / AIO	All
H1 G2	v1.44	All
H3	All
KH / KA	v1.33	All

🪲 Fixes

• KH manager version pre-1.33 does not support BMS registers (#773) @FozzieUK

v1.13.3

If your inverter is not running the latest manager version, you may need to select your manager version in the integration settings. See the wiki for details.

Inverter	Supported by default	Selectable in settings
H1 G1 / AC1 / AIO	All
H1 G2	v1.44	All
H3	All
KH / KA	v1.33	All

🪲 Fixes

• Fix "address 31052 overlaps an invalid range" error on KH (#766) @canton7
• Update version number displayed in HA (#767) @canton7

v1.13.2

If your inverter is not running the latest manager version, you may need to select your manager version in the integration settings. See the wiki for details.

Inverter	Supported by default	Selectable in settings
H1 G1 / AC1 / AIO	All
H1 G2	v1.44	All
H3	All
KH / KA	v1.33	All

🪲 Fixes

• Unbreak some KH, Kuara and H3 versions (#759) @canton7
• Fix problems if pymodbus was loaded by a different integration (#754) @canton7

v1.13.2b1

🪲 Fixes

• Have another shot at vendoring pymodbus (#754) @canton7

v1.13.1

If your inverter is not running the latest manager version, you may need to select your manager version in the integration settings. See the wiki for details.

Inverter	Supported by default	Selectable in settings
H1 G1 / AC1 / AIO	All
H1 G2	v1.44	All
H3	All
KH / KA	v1.33	All

🚀 Features

• Add the option to select your manager version (#739, #744) @canton7
• Add AC1 G2 support (#730, #750) @FozzieUK
• Add support for KH version 1.33 (#740) @ocl80
• Add SOH for some inverters (#703) @MartB
• Add bms cell temps and kwh remaining for H3 inverters (#704) @MartB
• Add BMS registers to new KH firmware (#746) @canton7
• Add additional BMS entities for H1 G2 and KH inverters on latest firmware (#735) @FozzieUK
• Add Peak Shaving work mode for H3 Inverters & H1 (Gen 2) (#737) @FozzieUK

🪲 Fixes

• Avoid problems caused by Home Assistant updating pymodbus (#749) @canton7

v1.13.1b3

If your inverter is not running the latest manager version, you may need to select your manager version in the integration settings. See the wiki for details.

Inverter	Supported by default	Selectable in settings
H1 G1 / AC1 / AIO	All
H1 G2	v1.44	All
H3	All
KH / KA	v1.33	All

🚀 Features

• Add the option to select your manager version (#739, #744) @canton7
• Add AC1 G2 support (#730, #750) @FozzieUK
• Add support for KH version 1.33 (#740) @ocl80
• Add SOH for some inverters (#703) @MartB
• Add bms cell temps and kwh remaining for H3 inverters (#704) @MartB
• Add BMS registers to new KH firmware (#746) @canton7
• Add additional BMS entities for H1 G2 and KH inverters on latest firmware (#735) @FozzieUK
• Add Peak Shaving work mode for H3 Inverters & H1 (Gen 2) (#737) @FozzieUK

🪲 Fixes

• Avoid problems caused by Home Assistant updating pymodbus (#749) @canton7

v1.13.1b2

If your inverter is not running the latest manager version, you may need to select your manager version in the integration settings. See the wiki for details.

Inverter	Supported by default	Selectable in settings
H1 G1 / AC1 / AIO	All
H1 G2	v1.44	All
H3	All
KH / KA	v1.33	All

🪲 Fixes

• Add BMS registers to new KH firmware (#746) @canton7

v1.13.1b1

This release is our first attempt to add support for multiple inverter manager versions. If you have been unable to use FoxESS - Modbus because your inverter manager version is too old or too new for this integration to support, please try this beta version and let us know how you get on.

If your inverter is not running the latest manager version, you may need to select your manager version in the integration settings. See the wiki for details.

Inverter	Supported by default	Selectable in settings
H1 G1 / AC1 / AIO	All
H1 G2	v1.44	All
H3	All
KH / KA	v1.33	All

🚀 Features

• Add the option to select your manager version (#739) @canton7
• Add AC1 G2 support (#730) @FozzieUK
• Add support for KH version 1.33 (#740) @ocl80
• Add additional BMS entities for H1 G2 and KH inverters on latest firmware (#735) @FozzieUK
• Add SOH for some inverters, implements #687 (#703) @MartB
• Add Peak Shaving work mode for H3 Inverters & H1 (Gen 2) (#737) @FozzieUK