chore(ci): bump org.rocksdb:rocksdbjni from 8.8.1 to 9.8.4

[dependabot]

Bumps org.rocksdb:rocksdbjni from 8.8.1 to 9.8.4.

Release notes

Sourced from org.rocksdb:rocksdbjni's releases.

RocksDB 9.8.4

9.8.4 (2024-11-18)

Behavior Changes

• When Remote Compaction is enabled, do not purge OPTIONS file immediately by DeleteObsoleteOptionsFiles() after SetOptions(). Rely on PurgeObsoleteFiles() to clean up obsolete OPTIONS file after each compaction.

9.8.3 (2024-11-12)

Bug Fixes

• Fix missing cases of corruption retry during DB open and read API processing.

9.8.2 (2024-11-06)

Public API Changes

• Added a new API Transaction::GetAttributeGroupIterator that can be used to create a multi-column-family attribute group iterator over the specified column families, including the data from both the transaction and the underlying database. This API is currently supported for optimistic and write-committed pessimistic transactions.

Behavior Changes

• BaseDeltaIterator now honors the read option allow_unprepared_value.

Bug Fixes

• BaseDeltaIterator now calls PrepareValue on the base iterator in case it has been created with the allow_unprepared_value read option set. Earlier, such base iterators could lead to incorrect values being exposed from BaseDeltaIterator.
• Fix a bug for replaying WALs for WriteCommitted transaction DB when its user-defined timestamps setting is toggled on/off between DB sessions.

9.8.1 (2024-10-31)

Bug Fixes

• Fix a leak of obsolete blob files left open until DB::Close(). This bug was introduced in version 9.4.0.

9.8.0 (2024-10-25)

New Features

• All non-block_cache options in BlockBasedTableOptions are now mutable with DB::SetOptions(). See also Bug Fixes below.
• When using iterators with BlobDB, it is now possible to load large values on an on-demand basis, i .e. only if they are actually needed by the application. This can save I/O in use cases where the va lues associated with certain keys are not needed. For more details, see the new read option allow_u nprepared_value and the iterator API PrepareValue.
• Add a new file ingestion option IngestExternalFileOptions::fill_cache to support not adding bloc ks from ingested files into block cache during file ingestion.
• The option allow_unprepared_value is now also supported for multi-column-family iterators (i.e. CoalescingIterator and AttributeGroupIterator).
• When a file with just one range deletion (standalone range deletion file) is ingested via bulk loa ding, it will be marked for compaction. During compaction, this type of files can be used to directl y filter out some input files that are not protected by any snapshots and completely deleted by the standalone range deletion file.

Behavior Changes

• During file ingestion, overlapping files level assignment are done in multiple batches, so that th ey can potentially be assigned to lower levels other than always land on L0.
• OPTIONS file to be loaded by remote worker is now preserved so that it does not get purged by the primary host. A similar technique as how we are preserving new SST files from getting purged is used for this. min_options_file_numbers_ is tracked like pending_outputs_ is tracked.
• Trim readahead_size during scans so data blocks containing keys that are not in the same prefix as the seek key in Seek() are not prefetched when ReadOptions::auto_readahead_size=true (default v alue) and ReadOptions::prefix_same_as_start = true

... (truncated)

Changelog

Sourced from org.rocksdb:rocksdbjni's changelog.

9.8.4 (11/18/2024)

Behavior Changes

• When Remote Compaction is enabled, do not purge OPTIONS file immediately by DeleteObsoleteOptionsFiles() after SetOptions(). Rely on PurgeObsoleteFiles() to clean up obsolete OPTIONS file after each compaction.

9.8.3 (11/12/2024)

Bug Fixes

• Fix missing cases of corruption retry during DB open and read API processing.

9.8.2 (11/06/2024)

Public API Changes

• Added a new API Transaction::GetAttributeGroupIterator that can be used to create a multi-column-family attribute group iterator over the specified column families, including the data from both the transaction and the underlying database. This API is currently supported for optimistic and write-committed pessimistic transactions.

Behavior Changes

• BaseDeltaIterator now honors the read option allow_unprepared_value.

Bug Fixes

• BaseDeltaIterator now calls PrepareValue on the base iterator in case it has been created with the allow_unprepared_value read option set. Earlier, such base iterators could lead to incorrect values being exposed from BaseDeltaIterator.
• Fix a bug for replaying WALs for WriteCommitted transaction DB when its user-defined timestamps setting is toggled on/off between DB sessions.

9.8.1 (10/31/2024)

Bug Fixes

• Fix a leak of obsolete blob files left open until DB::Close(). This bug was introduced in version 9.4.0.

9.8.0 (10/25/2024)

New Features

• All non-block_cache options in BlockBasedTableOptions are now mutable with DB::SetOptions(). See also Bug Fixes below.
• When using iterators with BlobDB, it is now possible to load large values on an on-demand basis, i.e. only if they are actually needed by the application. This can save I/O in use cases where the values associated with certain keys are not needed. For more details, see the new read option allow_unprepared_value and the iterator API PrepareValue.
• Add a new file ingestion option IngestExternalFileOptions::fill_cache to support not adding blocks from ingested files into block cache during file ingestion.
• The option allow_unprepared_value is now also supported for multi-column-family iterators (i.e. CoalescingIterator and AttributeGroupIterator).
• When a file with just one range deletion (standalone range deletion file) is ingested via bulk loading, it will be marked for compaction. During compaction, this type of files can be used to directly filter out some input files that are not protected by any snapshots and completely deleted by the standalone range deletion file.

Behavior Changes

• During file ingestion, overlapping files level assignment are done in multiple batches, so that they can potentially be assigned to lower levels other than always land on L0.
• OPTIONS file to be loaded by remote worker is now preserved so that it does not get purged by the primary host. A similar technique as how we are preserving new SST files from getting purged is used for this. min_options_file_numbers_ is tracked like pending_outputs_ is tracked.
• Trim readahead_size during scans so data blocks containing keys that are not in the same prefix as the seek key in Seek() are not prefetched when ReadOptions::auto_readahead_size=true (default value) and ReadOptions::prefix_same_as_start = true
• Assigning levels for external files are done in the same way for universal compaction and leveled compaction. The old behavior tends to assign files to L0 while the new behavior will assign the files to the lowest level possible.

Bug Fixes

• Fix a longstanding race condition in SetOptions for block_based_table_factory options. The fix has some subtle behavior changes because of copying and replacing the TableFactory on a change with SetOptions, including requiring an Iterator::Refresh() for an existing Iterator to use the latest options.
• Fix under counting of allocated memory in the compressed secondary cache due to looking at the compressed block size rather than the actual memory allocated, which could be larger due to internal fragmentation.
• GetApproximateMemTableStats() could return disastrously bad estimates 5-25% of the time. The function has been re-engineered to return much better estimates with similar CPU cost.
• Skip insertion of compressed blocks in the secondary cache if the lowest_used_cache_tier DB option is kVolatileTier.
• Fix an issue in level compaction where a small CF with small compaction debt can cause the DB to allow parallel compactions. (#13054)
• Several DB option settings could be lost through GetOptionsFromString(), possibly elsewhere as well. Affected options, now fixed:background_close_inactive_wals, write_dbid_to_manifest, write_identity_file, prefix_seek_opt_in_only

9.7.0 (09/20/2024)

New Features

• Make Cache a customizable class that can be instantiated by the object registry.
• Add new option prefix_seek_opt_in_only that makes iterators generally safer when you might set a prefix_extractor. When prefix_seek_opt_in_only=true, which is expected to be the future default, prefix seek is only used when prefix_same_as_start or auto_prefix_mode are set. Also, prefix_same_as_start and auto_prefix_mode now allow prefix filtering even with total_order_seek=true.
• Add a new table property "rocksdb.key.largest.seqno" which records the largest sequence number of all keys in file. It is verified to be zero during SST file ingestion.

... (truncated)

Commits

• 44e95d8 Update HISTORY and version to 9.8.4
• 778f25f Rely on PurgeObsoleteFiles Only for Options file clean up when remote compact...
• 1b497c9 Update HISTORY and version to 9.8.3
• 73be33c Fix missing cases of corruption retries (#13122)
• 139bfd0 Update patch version and HISTORY to 9.8.2
• 08ed842 Fix write committed transactions replay when UDT setting toggles (#13121)
• 026659f Add a new API Transaction::GetAttributeGroupIterator (#13119)
• 7d2fe50 Some small improvements around allow_unprepared_value and multi-CF iterators ...
• b569ba7 Make BaseDeltaIterator honor allow_unprepared_value (#13111)
• 23f7cf1 Call PrepareValue on the base iterator in BaseDeltaIterator (#13105)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[timtebeek]

@dependabot ignore this major version

[dependabot]

OK, I won't notify you about version 9.x.x again, unless you re-open this PR.