stm32f103c8 device is ok

demo/stm32f103c8/Core/Inc/gpio.h

@@ -0,0 +1,49 @@
+/**
+  ******************************************************************************
+  * @file    gpio.h
+  * @brief   This file contains all the function prototypes for
+  *          the gpio.c file
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __GPIO_H__
+#define __GPIO_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_GPIO_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__ GPIO_H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

demo/stm32f103c8/Core/Src/gpio.c

@@ -0,0 +1,54 @@
+/**
+  ******************************************************************************
+  * @file    gpio.c
+  * @brief   This file provides code for the configuration
+  *          of all used GPIO pins.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "gpio.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/*----------------------------------------------------------------------------*/
+/* Configure GPIO                                                             */
+/*----------------------------------------------------------------------------*/
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/** Configure pins as
+        * Analog
+        * Input
+        * Output
+        * EVENT_OUT
+        * EXTI
+*/
+void MX_GPIO_Init(void)
+{
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+
+}
+
+/* USER CODE BEGIN 2 */
+
+/* USER CODE END 2 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

demo/stm32f103c8/Core/Src/main.c

@@ -19,7 +19,8 @@
 /* USER CODE END Header */
 /* Includes ------------------------------------------------------------------*/
 #include "main.h"
-
+#include "gpio.h"
+#include "pikascript.h"
 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */
 
@@ -47,7 +48,6 @@
 
 /* Private function prototypes -----------------------------------------------*/
 void SystemClock_Config(void);
-static void MX_GPIO_Init(void);
 /* USER CODE BEGIN PFP */
 
 /* USER CODE END PFP */
@@ -87,7 +87,7 @@ int main(void)
   MX_GPIO_Init();
   /* USER CODE BEGIN 2 */
   HAL_GPIO_WritePin(GPIOA, GPIO_PIN_8, GPIO_PIN_RESET);
-
+  PikaObj *PikaMain = pikaScriptInit();
   /* USER CODE END 2 */
 
   /* Infinite loop */
@@ -139,31 +139,6 @@ void SystemClock_Config(void)
   }
 }
 
-/**
-  * @brief GPIO Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_GPIO_Init(void)
-{
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-
-  /* GPIO Ports Clock Enable */
-  __HAL_RCC_GPIOD_CLK_ENABLE();
-  __HAL_RCC_GPIOA_CLK_ENABLE();
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOA, GPIO_PIN_8, GPIO_PIN_RESET);
-
-  /*Configure GPIO pin : PA8 */
-  GPIO_InitStruct.Pin = GPIO_PIN_8;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-}
-
 /* USER CODE BEGIN 4 */
 
 /* USER CODE END 4 */

demo/stm32f103c8/MDK-ARM/startup_stm32f103xb.s

@@ -30,7 +30,7 @@
 ;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
 ; </h>
 
-Stack_Size		EQU     0x400
+Stack_Size		EQU     0x1000
 
                 AREA    STACK, NOINIT, READWRITE, ALIGN=3
 Stack_Mem       SPACE   Stack_Size
@@ -41,7 +41,7 @@ __initial_sp
 ;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
 ; </h>
 
-Heap_Size      EQU     0x200
+Heap_Size      EQU     0x3800
 
                 AREA    HEAP, NOINIT, READWRITE, ALIGN=3
 __heap_base