drivers: i2c: imx708: Use pm_runtime_use_autosuspend()#7128
Merged
pelwell merged 1 commit intoraspberrypi:rpi-6.12.yfrom Nov 11, 2025
Merged
drivers: i2c: imx708: Use pm_runtime_use_autosuspend()#7128pelwell merged 1 commit intoraspberrypi:rpi-6.12.yfrom
pelwell merged 1 commit intoraspberrypi:rpi-6.12.yfrom
Conversation
Switch the power management in the imx708 device driver to use auto- suspend with a 5s timeout. This improves mode switching time that avoids additional regulator switch-on delays and common register I2C writes. Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
6by9
approved these changes
Nov 11, 2025
Contributor
6by9
left a comment
6by9
left a comment
There was a problem hiding this comment.
Matches the change for imx477 from last week.
Be aware on this sensor that because the lens driver will have a reference on the same regulator, calling imx708_power_off does NOT mean that the sensor has been reset. We also don't have a software reset obviously in the register set (I can't see one documented in the datasheet).
As long as we do have the same register writes in all mode tables, then it should be fine.
popcornmix
added a commit
to raspberrypi/firmware
that referenced
this pull request
Nov 14, 2025
kernel: overlays: Add vec-gpio-pi5-overlay See: raspberrypi/linux#7127 kernel: drivers: i2c: imx708: Use pm_runtime_use_autosuspend() See: raspberrypi/linux#7128 kernel: mmc: Relax the 50MHz overclock check See: raspberrypi/linux#7135 kernel: pwm: rp1: Silently correct illegal values See: raspberrypi/linux#7133
popcornmix
added a commit
to raspberrypi/rpi-firmware
that referenced
this pull request
Nov 14, 2025
kernel: overlays: Add vec-gpio-pi5-overlay See: raspberrypi/linux#7127 kernel: drivers: i2c: imx708: Use pm_runtime_use_autosuspend() See: raspberrypi/linux#7128 kernel: mmc: Relax the 50MHz overclock check See: raspberrypi/linux#7135 kernel: pwm: rp1: Silently correct illegal values See: raspberrypi/linux#7133
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
3 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Switch the power management in the imx708 device driver to use auto- suspend with a 5s timeout.
This improves mode switching time that avoids additional regulator switch-on delays and common register I2C writes.