Ansible role for network configuration using systemd-networkd

This role translates YAML into a systemd-networkd configuration. "systemd-networkd is a system service that manages networks". For DNS resolution, you can choose between systemd-resolved and resolvconf.

Warning: This role deletes /etc/network/interfaces and disables the legacy networking.service.

Requirements

An apt based system that has systemd-networkd preinstalled, like Ubuntu or Debian.

Quick Start

First, you should be familiar with how to configure systemd-networkd, so that you know what you aim for. Useful links:

• https://wiki.archlinux.org/index.php/Systemd-networkd
• https://www.freedesktop.org/software/systemd/man/networkd.conf.html
• https://www.freedesktop.org/software/systemd/man/systemd.mount.html
• https://www.freedesktop.org/software/systemd/man/systemd.netdev.html
• https://www.freedesktop.org/software/systemd/man/systemd.network.html

Then, a playbook using this role looks like the following.

- hosts: router01
  become: true
  roles:
    - role: systemd-networkd
      systemd_network_confs:
        # /etc/systemd/networkd.conf.d/*.conf files are configured here; see below for detailed description
      systemd_resolve_confs:
        # /etc/systemd/resolved.conf.d/*.conf files are configured here; see below for detailed description
      systemd_mounts:
        # /etc/systemd/system/*.mount files are configured here; see below for examples
      systemd_network_netdevs:
        # /etc/systemd/network/*.netdev files are configured here; see below for examples
      systemd_network_networks:
        # /etc/systemd/network/*.network files are configured here; see below for examples

Hereby, the layout of the systemd_network_netdevs and systemd_network_networks role variables can be easiest understood looking at the following examples. In simple configurations with no virtual network interfaces you only need the systemd_network_networks role variable.

Example: Wired adapter using DHCP

systemd_network_networks:
  enp1s0:
    Network:
      DHCP: ipv4

##### Turns into:
#
##### /etc/systemd/network/enp1s0.network
#
# [Match]
# Name=enp1s0
#
# [Network]
# DHCP=ipv4

Example: Wired adapter using a static IP

systemd_network_networks:
  enp1s0:
    Network:
      Address: 10.1.10.9/24
      Gateway: 10.1.10.1
      DNS: 8.8.8.8

##### Turns into:
#
##### /etc/systemd/network/enp1s0.network
#
# [Match]
# Name=enp1s0
#
# [Network]
# Address=10.1.10.9/24
# Gateway=10.1.10.1
# DNS=8.8.8.8

Example: Bridge with two ports, using a static IP

systemd_network_netdevs:
  my_bridge:
    NetDev:
      Kind: bridge

systemd_network_networks:
  enp1s0 enp2s0:
    Network:
      Bridge: my_bridge

  my_bridge:
    Network:
      Address: 10.1.10.9/24
      Gateway: 10.1.10.1
      DNS: 8.8.8.8

##### Turns into:
#
##### /etc/systemd/network/my_bridge.netdev
#
# [NetDev]
# Name=my_bridge
# Kind=bridge
#
##### "/etc/systemd/network/enp1s0 enp2s0.network"
#
# [Match]
# Name=enp1s0 enp2s0
#
# [Network]
# Bridge=my_bridge
#
##### /etc/systemd/network/my_bridge.network
#
# [Match]
# Name=my_bridge
#
# [Network]
# Address=10.1.10.9/24
# Gateway=10.1.10.1
# DNS=8.8.8.8

Detailed Description

• A key x in systemd_network_confs causes an INI file /etc/systemd/networkd.conf.d/x.conf to be created. Under systemd.network_confs['x'], the first-layer keys turn into INI sections, the second-layer keys turn into INI properties and the values thereunder turn into the respective INI values.

• Similarly, a key x in systemd_resolve_confs causes an INI file /etc/systemd/resolved.conf.d/x.conf to be created.

• A key x in systemd_mounts causes an INI file /etc/systemd/system/<name>.mount to be created. However, because mount unit files need to be named after the mountpoint, this role generates the <name> via systemd-escape --suffix=mount --path {{ systemd_mounts['x'].Mount.Where }}. Therefore the name of the key x itself doesn't have any effect.

  Note that this role doesn't start/stop any mount units. This role only handles creation of mount unit files. To automatically mount a filesystem at boot, set systemd_mounts['x'].Unit.Before: local-fs.target (or remote-fs.target for remote filesystems).

• A key x in systemd_network_netdevs causes an INI file /etc/systemd/network/x.netdev to be created. By default it contains:

  [NetDev]
  Name=x

  systemd_network_netdevs['x'] analogously turns into INI.

• A key x in systemd_network_networks causes an INI file /etc/systemd/network/x.network to be created. By default it contains:

  [Match]
  Name=x

  systemd_network_networks['x'] analogously turns into INI, with one special behaviour: If you specify a Match key (turning into a [Match] section) inside systemd_network_networks['x'], then the default Name=x does not apply. This makes it possible to match on different things than name.

If you need multiple sections (respectively properties) with the same name, then specify that section (respectively property) once and give a list at the next YAML layer. Examples:

# Example for multiple [Route] sections
systemd_network_networks:
  enp1s0:
    Network:
      Address: 192.168.1.2/24
    Route:
      - Destination: 192.168.5.0/24
        Gateway: 192.168.1.1
      - Destination: 192.168.6.0/24
        Gateway: 192.168.1.1

##### Turns into:
#
##### /etc/systemd/network/enp1s0.network
#
# [Match]
# Name=enp1s0
#
# [Network]
# Address=192.168.1.2/24
#
# [Route]
# Destination=192.168.5.0/24
# Gateway=192.168.1.1
#
# [Route]
# Destination=192.168.6.0/24
# Gateway=192.168.1.1

# Example for multiple VLAN= properties
systemd_network_networks:
  enp1s0:
    Network:
      VLAN:
        - enp1s0.10
        - enp1s0.11

##### Turns into:
#
##### /etc/systemd/network/enp1s0.network
#
# [Match]
# Name=enp1s0
#
# [Network]
# VLAN=enp1s0.10
# VLAN=enp1s0.11

DNS resolver

This role automatically disables resolvconf, enables systemd-resolved and configures the /etc/resolv.conf symlink correctly for systemd-resolved. Note that systemd-resolved reads the interface-specific DNS servers from your systemd network configuration, you can configure global settings via systemd_resolve_confs.

Upload extra files

There also is a role variable systemd_network_copy_files which simply takes a list of which each element is passed to the Ansible copy module.

WireGuard client example

systemd_network_copy_files can for example be used for WireGuard key files, as illustrated in the following example. Installing WireGuard is out of the scope of this role and can be done using our wireguard role.

systemd_network_copy_files:
  - content: INSERT-CLIENT-PRIVATE-KEY-HERE
    dest: /etc/wireguard/private-key
    group: systemd-network
    mode: 0640

systemd_network_netdevs:
  wg0:
    NetDev:
      Kind: wireguard
      Description: WireGuard
    WireGuard:
      # NOTE: PrivateKeyFile needs at least systemd version 242.
      PrivateKeyFile: /etc/wireguard/private-key
      ListenPort: 51820
    WireGuardPeer:
      # Use a list, so we can add further peers if we desire.
      - PublicKey: INSERT-SERVER-PUBLIC-KEY-HERE
        AllowedIPs: 0.0.0.0/0
        Endpoint: 1.2.3.4:51820
        PersistentKeepalive: 20

systemd_network_networks:
  enp1s0:
    Network:
      DHCP: ipv4
  wg0:
    Network:
      Address: 192.168.30.11/24

Role variable defaults

Name	Default	Description
systemd_network_confs	{}	#detailed-description
systemd_resolve_confs	{}	#detailed-description
systemd_mounts	{}	#detailed-description
systemd_network_netdevs	{}	#detailed-description
systemd_network_networks	{}	#detailed-description
systemd_network_copy_files	[]	#upload-extra-files
systemd_network_keep_existing_definitions	false	If false, the role deletes existing .netdev and .network files in /etc/systemd/network/ and also deletes the corresponding network interfaces.