Viction Blockchain (or Viction for short) is an innovative solution to the scalability problem with the Ethereum blockchain. Our mission is to be a leading force in building the Internet of Value, and its infrastructure. We are working to create an alternative, scalable financial system which is more secure, transparent, efficient, inclusive, and equitable for everyone.
Viction relies on a system of 150 Masternodes with a Proof of Stake Voting consensus that can support near-zero fee, and 2-second transaction confirmation times. Security, stability, and chain finality are guaranteed via novel techniques such as double validation, staking via smart-contracts, and "true" randomization processes.
Viction supports all EVM-compatible smart-contracts, protocols, and atomic cross-chain token transfers. New scaling techniques such as sharding, private-chain generation, and hardware integration will be continuously researched and incorporated into Viction Blockchain's masternode architecture. This architecture will be an ideal scalable smart-contract public blockchain for decentralized apps, token issuances, and token integrations for small and big businesses.
More details can be found at our white papers.
Read more about us on:
- our website: https://viction.xyz
- our documentation portal: https://docs.viction.xyz
- our blockchain explorer: https://vicscan.xyz
Viction supports both binaries build and Docker build for your convenience. Building Viction requires Go lang and C compiler on all platforms (Linux, Windows, MacOS).
Due to some changes in Go-lang, Viction need to be build specificly with Go 1.13. The following command will install Go 1.13.15 side-by-side with current system wide Go version:
go install golang.org/dl/g1.13.15@latest
go1.13.15 downloadClone this repository and change working directory to where you clone it, then run the following commands:
go1.13.15 run build/ci.go installClone this repository and change working directory to where you clone it, then run the following commands:
docker build --file Dockerfile.node -t "viction:2.4.0" .Alternatively, you could quickly download our pre-complied binary from our github release page
Going through all the possible command line flags is out of scope here, but we've enumerated a few common parameter combos to get you up to speed quickly on how you can run your own tomo instance.
Viction requires an account when running the node, even it's a full node. If you already had an existing account, import it. Otherwise, please initialize new accounts.
Initialize new account
tomo account new --password /path/to/password_file --keystore /path/to/keystore_dirImport account
tomo account import /path/to/privatekey_file --password /path/to/password_file --keystore /path/to/keystore_dirTo run full node with default settings, simply run this command.
tomo --datadir /path/to/data_dir --keystore /path/to/keystore_dir --password /path/to/password_file --unlock 0The following also run a full node on mainnet, with more customization.
tomo --datadir /path/to/data_dir \
--keystore /path/to/keystore_dir \
--password /path/to/password_file --unlock 0 \
--identity my-full-node \
--networkid 88 \
--gasprice 250000000 \
--rpc --rpcaddr 0.0.0.0 --rpcport 8545 --rpcvhosts "*" --rpccorsdomain "*" \
--rpcapi "eth,debug,net,db,personal,web3" \
--ws --wsaddr 0.0.0.0 --wsport 8546 --wsorigins "*" \
--mine \
--bootnodes "enode://fd3da177f9492a39d1e7ce036b05745512894df251399cb3ec565081cb8c6dfa1092af8fac27991e66b6af47e9cb42e02420cc89f8549de0ce513ee25ebffc3a@3.212.20.0:30303,enode://97f0ca95a653e3c44d5df2674e19e9324ea4bf4d47a46b1d8560f3ed4ea328f725acec3fcfcb37eb11706cf07da669e9688b091f1543f89b2425700a68bc8876@104.248.98.78:30301,enode://b72927f349f3a27b789d0ca615ffe3526f361665b496c80e7cc19dace78bd94785fdadc270054ab727dbb172d9e3113694600dd31b2558dd77ad85a869032dea@188.166.207.189:30301,enode://c8f2f0643527d4efffb8cb10ef9b6da4310c5ac9f2e988a7f85363e81d42f1793f64a9aa127dbaff56b1e8011f90fe9ff57fa02a36f73220da5ff81d8b8df351@104.248.98.60:30301" \
--port 30303 \
--syncmode "full" --gcmode "full" \
--ethstats my-full-node:getty-site-pablo-auger-room-sos-blair-shin-whiz-delhi@stats.viction.xyz \
--verbosity 3Brief explainations on the used flags:
--datadir: path to your data directory created above.
--keystore: path to your account's keystore created above.
--password: your account's password.
--identity: your full node's name.
--networkid: our network ID.
--tomo-testnet: required when running a network other than Mainnet
--gasprice: Minimal gas price to accept for mining a transaction.
--rpc, --rpcaddr, --rpcport, --rpcvhosts, --rpccorsdomain: configure HTTP-RPC.
--ws, --wsaddr, --wsport, --wsorigins: configure Websocket.
--mine: your full-node wants to register to be a candidate for masternode selection.
--bootnodes: list of enodes of other peers that your full-node will try to connect at startup
--port: your full-node's listening port (default to 30303)
--nat NAT port mapping mechanism (any|none|upnp|pmp|extip:<IP>) to let other peer connect to your node easier
--synmode: blockchain sync mode ("fast", "full", or "light". More detail: https://github.com/BuildOnViction/victionchain/blob/master/eth/downloader/modes.go#L24)
--gcmode: blockchain garbage collection mode ("full", "archive")
--store-reward: store reward report. must be used in conjuction with --gcmode archive for archive node
--ethstats: send data to stats website
--verbosity: log level from 1 to 5. Here we're using 4 for debug messages
From the above built image. Run the following command for full node on mainnet:
docker run --name viction \
-v "/path/to/data_dir:/tomochain/data" \
-v "/path/to/keystore_dir:/tomochain/keystore" \
-v "/path/to/password_file:/tomochain/password" \
-p 8545:8545 \
-p 8546:8546 \
-p 30303:30303 \
-e IDENTITY=my-full-node \
-e NETWORK_ID=88
-e BOOTNODES=enode://fd3da177f9492a39d1e7ce036b05745512894df251399cb3ec565081cb8c6dfa1092af8fac27991e66b6af47e9cb42e02420cc89f8549de0ce513ee25ebffc3a@3.212.20.0:30303,enode://97f0ca95a653e3c44d5df2674e19e9324ea4bf4d47a46b1d8560f3ed4ea328f725acec3fcfcb37eb11706cf07da669e9688b091f1543f89b2425700a68bc8876@104.248.98.78:30301,enode://b72927f349f3a27b789d0ca615ffe3526f361665b496c80e7cc19dace78bd94785fdadc270054ab727dbb172d9e3113694600dd31b2558dd77ad85a869032dea@188.166.207.189:30301,enode://c8f2f0643527d4efffb8cb10ef9b6da4310c5ac9f2e988a7f85363e81d42f1793f64a9aa127dbaff56b1e8011f90fe9ff57fa02a36f73220da5ff81d8b8df351@104.248.98.60:30301 \
-e NETSTATS_HOST=stats.viction.xyz \
-e NETSTATS_PORT=443 \
-e WS_SECRET=getty-site-pablo-auger-room-sos-blair-shin-whiz-delhi \
-e VERBOSITY=3 \
docker.io/library/viction:2.4.0Brief explainations on the supported variables:
EXTIP: Your IP on the internet to let other peers connect to your nodes. Only use this if you have trouble connecting to peers.
IDENTITY: your full node's name.
PRIVATE_KEY: Private key of node's account in plain text.
PASSWORD: Password to encrypt/decrypt node's account in plain text.
NETWORK_ID: our network ID.
BOOTNODES: list of enodes of other peers that your full-node will try to connect at startup.
NETSTATS_HOST: Hostname of Ethstats service.
NETSTATS_PORT: Port of Ethstats service.
WS_SECRET: Secret of Ethstats service.
VERBOSITY: log level from 1 to 5. Here we're using 4 for debug messages.
For full featured guide. Please check our docs: https://docs.viction.xyz/masternode
Thank you for considering to try out our network and/or help out with the source code. We would love to get your help; feel free to lend a hand. Even the smallest bit of code, bug reporting, or just discussing ideas are highly appreciated.
If you would like to contribute to the tomochain source code, please refer to our Developer Guide for details on configuring development environment, managing dependencies, compiling, testing and submitting your code changes to our repo.
Please also make sure your contributions adhere to the base coding guidelines:
- Code must adhere to official Go formatting guidelines (i.e uses gofmt).
- Code comments must adhere to the official Go commentary guidelines.
- Pull requests need to be based on and opened against the
masterbranch. - Any code you are trying to contribute must be well-explained as an issue on our github issue page
- Commit messages should be short but clear enough and should refer to the corresponding pre-logged issue mentioned above.