Swoole

Swoole is an event-driven asynchronous & concurrent networking communication framework with high performance written only in C for PHP.

Document: https://rawgit.com/tchiotludo/swoole-ide-helper/english/docs/index.html

IDE Helper: https://github.com/tchiotludo/swoole-ide-helper

中文文档: http://wiki.swoole.com/

IRC: http://webchat.freenode.net/?channels=swoole&uio=d4

event-based

The network layer in Swoole is event-based and takes full advantage of the underlaying epoll/kqueue implementation, making it really easy to serve thousands of connections.

concurrent

On the request processing part, Swoole uses a multi-process model. Every process works as a worker. All business logic is executed in workers, synchronously.

With the synchronous logic execution, you can easily write large and robust applications and take advantage of almost all libraries available to the PHP community.

in-memory

Unlike traditional apache/php-fpm stuff, the memory allocated in Swoole will not be free'd after a request, which can improve performance a lot.

Why Swoole?

Traditional PHP applications almost always run behind Apache/Nginx, without much control of the request. This brings several limitations:

1. All memory will be freed after request. All PHP code needs be re-compiled on every request. Even with opcache enabled, all opcode still needs to be re-executed.
2. It is almost impossible to implement long connections and connections pooling techniques.
3. Implementing asynchronous tasks requires 3rd party queue servers, such as rabbitmq and beanstalkd.
4. Implementing realtime applications such as chatting server requires 3rd party languages, nodejs for example.

This why Swoole appeared. Swoole extends the use cases of PHP, and brings all these possibilities to the PHP world. By using Swoole, you can build enhanced web applications with more control, real-time chatting servers, etc more easily.

Requirements

• PHP 5.3.10 or later
• Linux, OS X and basic Windows support (Thanks to cygwin)
• GCC 4.4 or later

Installation

1. Install via pecl

   pecl install swoole
   

2. Install from source

   sudo apt-get install php5-dev
   git clone https://github.com/swoole/swoole-src.git
   cd swoole-src
   phpize
   ./configure
   make && make install
   

Introduction

Swoole includes components for different purposes: Server, Task Worker, Timer, Event and Async IO. With these components, Swoole allows you to build many features.

Server

This is the most important part in Swoole. It provides necessary infrastructure to build server applications. With Swoole server, you can build web servers, chat messaging servers, game servers and almost anything you want.

The following example shows a simple echo server.

// create a server instance
$serv = new swoole_server("127.0.0.1", 9501); 

// attach handler for connect event, once client connected to server the registered handler will be executed
$serv->on('connect', function ($serv, $fd){  
    echo "Client:Connect.\n";
});

// attach handler for receive event, every piece of data received by server, the registered handler will be
// executed. And all custom protocol implementation should be located there.
$serv->on('receive', function ($serv, $fd, $from_id, $data) {
    $serv->send($fd, $data);
});

$serv->on('close', function ($serv, $fd) {
    echo "Client: Close.\n";
});

// start our server, listen on port and ready to accept connections
$serv->start();

Try to extend your server and implement what you want!

Http Server

$http = new swoole_http_server("0.0.0.0", 9501);

$http->on('request', function ($request, $response) {
    $response->header("Content-Type", "text/html; charset=utf-8");
    $response->end("<h1>Hello Swoole. #".rand(1000, 9999)."</h1>");
});

$http->start();

WebSocket Server

$ws = new swoole_websocket_server("0.0.0.0", 9502);

$ws->on('open', function ($ws, $request) {
    var_dump($request->fd, $request->get, $request->server);
    $ws->push($request->fd, "hello, welcome\n");
});

$ws->on('message', function ($ws, $frame) {
    echo "Message: {$frame->data}\n";
    $ws->push($frame->fd, "server: {$frame->data}");
});

$ws->on('close', function ($ws, $fd) {
    echo "client-{$fd} is closed\n";
});

$ws->start();

Real async-mysql client

$db = new swoole_mysql('127.0.0.1', 'root', 'root', 'test');

$db->on("close", function($o){
    echo "mysql connection is closed\n";
});

$db->query("select now() as now_t", function($db, $result_rows){
    var_dump($result_rows);
    $db->close();
});

Real async-redis client

$client = new swoole_redis;
$client->connect('127.0.0.1', 6379, function (swoole_redis $client, $result) {
    echo "connect\n";
    var_dump($result);
    $client->set('key', 'swoole', function (swoole_redis $client, $result) {
        var_dump($result);
        $client->get('key', function (swoole_redis $client, $result) {
            var_dump($result);
            $client->close();
        });
    });
});

Async http Client

$cli = new swoole_http_client('127.0.0.1', 80);

$cli->setHeaders(['User-Agent' => "swoole"]);
$cli->post('/dump.php', array("test" => '9999999'), function (swoole_http_client $cli)
{
    echo "#{$cli->sock}\tPOST response Length: " . strlen($cli->body) . "\n";
    $cli->get('/index.php', function (swoole_http_client $cli)
    {
        echo "#{$cli->sock}\tGET response Length: " . strlen($cli->body) . "\n";
    });
});

Async WebSocket Client

$cli = new swoole_http_client('127.0.0.1', 9501);

$cli->on('message', function ($_cli, $frame) {
    var_dump($frame);
});

$cli->upgrade('/', function ($cli) {
    echo $cli->body;
    $cli->push("hello world");
});

Multi-port and mixed protocol

$serv = new swoole_http_server("127.0.0.1", 9501, SWOOLE_BASE);

$port2 = $serv->listen("0.0.0.0", 9502, SWOOLE_SOCK_TCP);
$port2->on('receive', function (swoole_server $serv, $fd, $from_id, $data) {
    var_dump($data);
    $serv->send($fd, $data);    
});

$serv->on('request', function($req, $resp) {
    $resp->end("<h1>Hello World</h1>");
});


$serv->start();

Task Worker

Swoole brings you two types of workers: server workers and task workers. Server workers are for request handling, as demonstrated above. Task workers are for task execution. With task workers, we can make our task executed asynchronously without blocking the server workers.

Task workers are mainly used for time-consuming tasks, such as sending password recovery emails. And ensure the main request returns as soon as possible.

The following example shows a simple server with task support.

$serv = new swoole_server("127.0.0.1", 9502);

// sets server configuration, we set task_worker_num config greater than 0 to enable task workers support
$serv->set(array('task_worker_num' => 4));

// attach handler for receive event, which have explained above.
$serv->on('receive', function($serv, $fd, $from_id, $data) {
    // we dispath a task to task workers by invoke the task() method of $serv
    // this method returns a task id as the identity of ths task
    $task_id = $serv->task($data);
    echo "Dispath AsyncTask: id=$task_id\n";
});

// attach handler for task event, the handler will be executed in task workers.
$serv->on('task', function ($serv, $task_id, $from_id, $data) {
    // handle the task, do what you want with $data
    echo "New AsyncTask[id=$task_id]".PHP_EOL;

    // after the task task is handled, we return the results to caller worker.
    $serv->finish("$data -> OK");
});

// attach handler for finish event, the handler will be executed in server workers, the same worker dispatched this task before.
$serv->on('finish', function ($serv, $task_id, $data) {
    echo "AsyncTask[$task_id] Finish: $data".PHP_EOL;
});

$serv->start();

Swoole also supports synchronous tasks. To use synchronous tasks, just simply replace $serv->task($data) with $serv->taskwait($data). Unlike task(), taskwait() will wait for a task to complete before it returns its response.

Timer

Swoole has built in millisecond timer support. By using the timer, it is easy to get a block of code executed periodically (really useful for managing interval tasks).

To demonstrate how the timer works, here is a small example:

//interval 2000ms
$serv->tick(2000, function ($timer_id) {
    echo "tick-2000ms\n";
});

//after 3000ms
$serv->after(3000, function () {
    echo "after 3000ms.\n"
});

In the example above, we first set the timer event handler to swoole_server to enable timer support. Then, we add two timers by calling bool swoole_server::addtimer($interval) once the server started. To handle multiple timers, we switch the $interval in registered handler and do what we want to do.

Event

Swoole's I/O layer is event-based, which is very convenient to add your own file descriptor to Swoole's main eventloop. With event support, you can also build fully asynchronous applications with Swoole.

To use events in Swoole, we can use swoole_event_set() to register event handler to sepecified file descriptor, once registered descriptors become readable or writeable, our registered handler will be invoked. Also, we can using bool swoole_event_del(int $fd); to remove registered file descriptor from eventloop.

The following are prototypes for the related functions:

bool swoole_event_add($fd, mixed $read_callback, mixed $write_callback, int $flag);
bool swoole_event_set($fd, mixed $read_callback, mixed $write_callback, int $flag);
bool swoole_event_del($fd);

The $fid parameter can be one of the following types:

• unix file descriptor
• stream resource created by stream_socket_client()/fsockopen()
• sockets resources created by socket_create() in sockets extension (require compile swoole with --enable-sockets support)

The $read_callback and $write_callback are callbacks for corresponding read/write event.

The $flag is a mask to indicate what type of events we should get notified, can be SWOOLE_EVENT_READ, SWOOLE_EVENT_WRITE or SWOOLE_EVENT_READ | SWOOLE_EVENT_WRITE

Async IO

Swoole's Async IO provides the ability to read/write files and lookup dns records asynchronously. The following are signatures for these functions:

bool swoole_async_readfile(string $filename, mixed $callback);
bool swoole_async_writefile('test.log', $file_content, mixed $callback);
bool swoole_async_read(string $filename, mixed $callback, int $trunk_size = 8192);
bool swoole_async_write(string $filename, string $content, int $offset = -1, mixed $callback = NULL);
void swoole_async_dns_lookup(string $domain, function($host, $ip){});
bool swoole_timer_after($after_n_ms, mixed $callback);
bool swoole_timer_tick($n_ms, mixed $callback);
bool swoole_timer_clear($n_ms, mixed $callback);

Refer API Reference for more detail information of these functions.

Client

Swoole also provides a Client component to build tcp/udp clients in both asynchronous and synchronous ways. Swoole uses the swoole_client class to expose all its functionalities.

synchronous blocking:

$client = new swoole_client(SWOOLE_SOCK_TCP);
if (!$client->connect('127.0.0.1', 9501, 0.5))
{
    die("connect failed.");
}

if (!$client->send("hello world"))
{
    die("send failed.");
}

$data = $client->recv();
if (!$data)
{
    die("recv failed.");
}

$client->close();

asynchronous nonblocking:

$client = new swoole_client(SWOOLE_SOCK_TCP, SWOOLE_SOCK_ASYNC);

$client->on("connect", function($cli) {
    $cli->send("hello world\n");
});
$client->on("receive", function($cli, $data){
    echo "Received: ".$data."\n";
});
$client->on("error", function($cli){
    echo "Connect failed\n";
});
$client->on("close", function($cli){
    echo "Connection close\n";
});

$client->connect('127.0.0.1', 9501, 0.5);

The following methods are available in swoole_client:

swoole_client::__construct(int $sock_type, int $is_sync = SWOOLE_SOCK_SYNC, string $key);
int swoole_client::on(string $event, mixed $callback);
bool swoole_client::connect(string $host, int $port, float $timeout = 0.1, int $flag = 0)
bool swoole_client::isConnected();
int swoole_client::send(string $data);
bool swoole_client::sendfile(string $filename)
string swoole_client::recv(int $size = 65535, bool $waitall = 0);
bool swoole_client::close();

Refer API Reference for more detail information of these functions.

API Reference

• 中文
• English

Related Projects

• SwooleFramework Web framework powered by Swoole

Contribution

Your contribution to Swoole development is very welcome!

You may contribute in the following ways:

• Repost issues and feedback
• Submit fixes, features via Pull Request
• Write/polish documentation

License

Apache License Version 2.0 see http://www.apache.org/licenses/LICENSE-2.0.html