soc: nxp: mcux: Enable DMAMUX driver for S32Z270

[haduongquang]

The S32Z270 uses DMAMUX instead of TRIGMUX.
Update the configuration to enable the DMAMUX driver

This fix #98168

test drivers.dma.chan_blen_transfer log:

------ TESTSUITE SUMMARY START ------

SUITE PASS - 100.00% [dma_m2m]: pass = 4, fail = 0, skip = 0, total = 4 duration = 8.061 seconds
 - PASS - [dma_m2m.test_tst_dma0_m2m_chan0_burst16] duration = 2.016 seconds
 - PASS - [dma_m2m.test_tst_dma0_m2m_chan0_burst8] duration = 2.015 seconds
 - PASS - [dma_m2m.test_tst_dma0_m2m_chan1_burst16] duration = 2.015 seconds
 - PASS - [dma_m2m.test_tst_dma0_m2m_chan1_burst8] duration = 2.015 seconds

test drivers.dma.loop_transfer log:

------ TESTSUITE SUMMARY START ------

SUITE PASS - 100.00% [dma_m2m_loop]: pass = 3, fail = 0, skip = 0, total = 3 duration = 1.103 seconds
 - PASS - [dma_m2m_loop.test_tst_dma0_m2m_loop] duration = 0.282 seconds
 - PASS - [dma_m2m_loop.test_tst_dma0_m2m_loop_repeated_start_stop] duration = 0.277 seconds
 - PASS - [dma_m2m_loop.test_tst_dma0_m2m_loop_suspend_resume] duration = 0.544 seconds

------ TESTSUITE SUMMARY END ------

===================================================================
PROJECT EXECUTION SUCCESSFUL

[manuargue]

I'd suggest using:

Suggested change

	if((${MCUX_DEVICE} MATCHES "S32K3") OR (${MCUX_DEVICE} MATCHES "S32Z"))
	if(CONFIG_SOC_SERIES_S32K3 OR CONFIG_SOC_SERIES_S32ZE)

[sonarqubecloud]

Quality Gate passed

Issues
0 New issues
0 Accepted issues

Measures
0 Security Hotspots
0.0% Coverage on New Code
0.0% Duplication on New Code

See analysis details on SonarQube Cloud