GL200 Main board
Function
Variants
Parts
Programming
External interfaces
Service interfaces
Board view
Schematics
The GL200 radio transmitter contains all vital elements on one board. The board receives state of control sticks and switches (some of which have their own boards), then transmits the control signal. It also receives the OcuSync video signal and telemetry from the drone and provides USB interface for reading the data and reconfiguring the drone from a mobile device.
Only one variant of the RC is known.
| Marking | Overview |
|---|---|
| GL200A | First version. |
Variants of the board itself:
| Marking | Overview |
|---|---|
| P01831.06 |
| Marking | Amt. | Pkg. | Function | Specification |
|---|---|---|---|---|
| 77614-1 89193.1 | 1 | |||
| 78x | 1 | |||
| ACPD4GD21D3 EDA5167KB | 1 | |||
| W1A 6o | 17 | PMST3904 NPN switching transistor; used for LED driving | description | |
| Leadcore LC1160 S259x8916 403 HA6956 | 1 | |||
| Leadcore LC1860C 2F21716-323 HM842 08 ARM | 1 | |||
| 7AA98 JWB30 19TY | 1 | |||
| WM9 6b / WM9 71 | 11 | |||
| PA 6uE | 1 | |||
| P26.0 D652 | 1 | |||
| S20 | 1 | |||
| C3NGC | 1 | 4-lead 7x1.5 SMD | plastic covered metal case with quartz oscillator; Seiko Epson MC-146 series or its knock-off, exact model unknown | description |
| STM32 F051K86 GH25Y9U CHN 697 | 1 | |||
| T120 MBMN | 1 | |||
| KL2 | 2 | |||
| KL3 ON | 2 | |||
| KJE ON | 2 | |||
| SBK TI 6CI CJ59 | 1 | |||
| 2554 TI 6AF S18E | 1 | |||
| LH7 | 1 | 10-lead UQFN/RSE | High-Speed USB 2.0 1:2 Mux/Demux Switch With Single Enable | description |
| 2015CS AD7V7J | 1 | |||
| BQ24259 ATEN | 1 | |||
| 392A M669 O645 | 1 | |||
| 165 3959 1701 | 1 | |||
| J1- | 5 |
TODO
Connectors on the board are:
| Marking | Overview |
|---|---|
| TODO |
The following service pads exist on this board:
| Marking | Overview |
|---|---|
| TODO |
Top of a P01831.06 board:
Bottom of the P01831.06 board:
Top of another P01831.06 board, with Test Point names layer:
Bottom of the P01831.06 board:
No schematics available.