Two factor authentication zh HK
Steam includes two-factor authentication system known as "Escrow" that requires extra details for various account-related activity. ่ฉณๆ ่ซ่ฆ**ใไบคๆ่ๅธๅ ด็ขบ่ชใๅไบคๆ่ๅธ้่จ็ฎก**ใ This page considers that 2FA system as well as our solution that integrates with it, called ASF 2FA.
Regardless if you use ASF 2FA or not, ASF includes proper logic and is fully aware of accounts protected by standard 2FA. ๅฎๆๅจ้่ฆๆใไพๅฆๅจ็ป้ๆ้ใๅๆจ่ซๆฑๆ้็่ฉณ็ดฐ่ณ่จใ However, those requests can be automated by using ASF 2FA, which will automatically generate required tokens, saving you hassle and enabling extra functionality (described below).
ASF 2FA is a built-in module responsible for providing 2FA features to the ASF process, such as generating tokens and accepting confirmations. It works by duplicating your existing authenticator details, so that you can use your current authenticator and ASF 2FA at the same time.
ๆจๅฏไปฅๅท่ก2fa**ๅฝไปค**ไปฅๆชขๆฅๆฉๆขฐไบบๅธณๆถๆฏๅฆๅทฒๅ็จ2FAใ Unless you've already imported your authenticator as ASF 2FA, all standard 2fa commands will be non-operative, which means that your account is not using ASF 2FA, therefore it's also unavailable for advanced ASF features that require the module to be operative.
In general we strongly recommend to duplicate your existing authenticator, as after all, that's the main purpose ASF 2FA was designed for. However, ASF comes with official MobileAuthenticator plugin which further extends ASF 2FA allowing you to link completely new authenticator as well. This can be useful in case you're unable or unwilling to use other tools and you do not mind ASF 2FA to become your main (and maybe only) authenticator.
In order to assign new 2FA and automatically import it as ASF 2FA, you should do the following steps:
- Create ASF bot for the target account, start it and log in, which you probably already did.
- Assign working and operative phone number to the account used by the bot here. Phone number is absolutely required, there is no way to add 2FA without it.
- Execute
2fainit [Bot]command, replacing[Bot]with your bot's name.
Assuming you got a successful reply, the following two things have happened:
- A new
<Bot>.maFile.PENDINGfile was generated by ASF in yourconfigdirectory. - SMS was sent from Steam to the phone number you have assigned for the account above.
The authenticator details are not operative yet, however, you can review the generated file if you'd like to. If you want to be double safe, you can for example already write down revocation code, which is normally explained further below.
- Once satisfied, execute
2fafinalize [Bot] <ActivationCode>command, replacing[Bot]with your bot's name and<ActivationCode>with the code you've received through SMS.
Assuming everything worked properly, previously generated <Bot>.maFile.PENDING file was renamed to <Bot>.maFile.NEW. This indicates that your 2FA credentials are now valid and active. We recommend you to create a copy of that file and keep it in secure and safe location. In addition to that, we recommend you to open it (it's a text file) and write down revocation_code which will allow you, as the name implies, to revoke the authenticator in case you lose it.
In regards to technical details, the generated maFile includes all details that we have received from Steam server during linking authenticator, and in addition to that device_id field which may be needed for other authenticators. The file follows and is fully compatible with SDA for import.
ASF automatically imports your authenticator once the procedure is done, therefore 2fa and other related commands should now be operative for the bot account you linked the authenticator to.
Import process requires already linked and operational authenticator that is supported by ASF. ASF currently supports a few different official and unofficial sources of 2FA - Android, iOS, SteamDesktopAuthenticator and WinAuth, on top of manual method which allows you to provide required credentials yourself. If you don't have any authenticator yet, you need to choose one of available apps and set it up firstly. ๅฆๆๆจไธ็ฅ้้ธๆๅชไธๅ๏ผๆๅๆจ่ฆ WinAuth๏ผไฝๅช่ฆๆจๆ็ ง่ชชๆๆไฝ๏ผไธ่ฟฐไปปไฝไธ้ ้ฝๅฏไปฅๆญฃๅธธๅทฅไฝใ
ไปฅไธๆๆๆๅ้ฝ่ฆๆฑๆจๅทฒๆๆๅจไธ่ฟฐๅทฅๅ ท/ๆ็จ็จๅผไธญ ๅฏ้่ก็่บซไปฝ้ฉ่ญๅจใ ๅฆๆๅฐๅ ฅ็กๆ่ณๆ๏ผASF 2FAๅฐ็กๆณๆญฃๅธธ้่ก๏ผๅ ๆญคๅจๅ่ฉฆๅฐๅ ฅ่ณๆไนๅ๏ผ่ซ็ขบไฟๆจ็่บซไปฝ้ฉ่ญๅจ้่กๆญฃๅธธใ ้ๅ ๆฌๆธฌ่ฉฆๅ้ฉ่ญไปฅไธ่บซไปฝ้ฉ่ญๅจๅ่ฝ่ฝๅฆๆญฃๅธธ้่ก๏ผ
- ๆจๅฏไปฅ็ๆไปฃ็ขผ๏ผไธๅฎๅๅSteam็ถฒ็ตกๆฟ่ช
- ๆจๅฏไปฅ็ฑๆตๅ่บซไปฝ้ฉ่ญๅจ็ฒๅไบคๆ็ขบ่ช
- ๆจๅฏไปฅๆฅๅ้ไบไบคๆ็ขบ่ช๏ผไธฆไธๅฎๅ่ขซSteam็ถฒ็ตกๆญฃ็ขบๅฐ่ญๅฅ็บ็ขบ่ช/ๆ็ต
Ensure that your authenticator works by checking if above actions work - if they don't, then they won't work in ASF either, you'll only waste time and cause yourself additional trouble.
The below instructions apply to Steam app in version 2.X, there are currently no resources on extracting required details from version 3.0 onwards. We'll update this section once generally-available method is found. As of today, a workaround would be to intentionally install older version of Steam app, register 2FA and extract the required details first, after which it's possible to update the application to latest version - existing authenticator will continue to work.
้ๅธธๆ ๆณไธ๏ผๆจ้่ฆ**rootๆฌ้ไปฅๅพๆจ็Androidๆๆฉๅฐๅ ฅ่บซไปฝ้ฉ่ญๅจใ Rootๆนๆณๅ ่ฃ็ฝฎ่็ฐ๏ผๆไปฅๆ็กๆณๆๅฐๆจrootๆจ็่จญๅใ ๆจๅฏไปฅ่จชๅXDA**ๆฅ่ฉขๅฏฆ็จๆๅไธฆ็ญ่งฃๆดๅค้ๆผ rooting ็้็จ่ณ่จใ ๅฆๆๆจๆพไธๅฐ้ฉ็จๆผๆจ็่จญๅๆๆ็จ๏ผๅ่ฉฆๆๆๅฉ็จGoogleๆ็ดขใ
็่ซไธไพ่ชฌ๏ผๆฒๆrootๆฌ้ๅฐฑ็กๆณ่จชๅๅไฟ่ญท็Steamๆชๆกใ The only official non-root method for extracting Steam files is creating unencrypted /data backup in one way or another and manually fetching appropriate files from it on your PC, however because such thing highly depends on your phone manufacturer and is not in Android standard, we won't discuss it here. ๅฆๆๆจๅพๅนธ้ๆ้ๆจฃ็ๅ่ฝ๏ผไฝ ๅฏไปฅ่ๆ
ฎๅฉ็จๅฎ๏ผไฝๅคงๅคๆธ็จๆถไธฆ้ๅฆๆญคใ
Unofficially, it is possible to extract the needed files without root access, by installing or downgrading your Steam app to version 2.1 (or earlier), setting up mobile authenticator and then creating a snapshot of the app (together with the data files that we need) through adb backup. ไฝๆฏ๏ผ็ฑๆผ้็จฎๆๅๆไปถ็ๆนๅผๅญๅจๅด้็ๅฎๅ
จๆผๆด๏ผไธๅฎๅ
จๆฒๆๆ่กๆฏๆด๏ผๆๅๅฐไธๆๅจๆญค่ฉณ็ดฐ่ชชๆ๏ผๅๅ ไนไธๆฏValveๅจๆฐ็ๆฌไธญ็ฆ็จๆญคๅฎๅ
จๆผๆด๏ผๆๅๅ
ๆฏๆๅฐๅญๅจไฝฟ็จๆญคๆนๆณ็ๅฏ่ฝๆงใ Still, it might be possible to do a clean install of that version, link new authenticator, extract the required files, and then upgrade the app, which should be just enough, but you're on your own with this method anyway.
Assuming that you've successfully rooted your phone, you should afterwards download any root explorer available on the market, such as this one (or any other one of your preference). ๆจ้ๅฏไปฅ้้ADB๏ผAndroid Debug Bridge๏ผๆไปปไฝๅ ถไปๅฏ็จ็ๆนๆณ่จชๅๅไฟ่ญท็ๆชๆก๏ผๆๅๅฐ้้่ณๆบ็ฎก็ๅจ้ฒ่ก่จชๅ๏ผๅ ็บๅฎ็ตๅฐๆฏๅฐ็จๆถๆๅๅฅฝ็ๆนๅผใ
ๆ้ๆ น็่ฆฝๅจๅพ๏ผๅฐ่ชๅฐ/data/data่ณๆๅคพใ ่ซ่จไฝ๏ผ/data/data็ฎ้ๅๅฐไฟ่ญท๏ผๅฆๆๆฒๆroot่จชๅๆฌ้๏ผๆจๅฐ็กๆณ่จชๅๅฎใ ๅจ้ฃๆพๅฐcom.valvesoftware.android.steam.community่ณๆๅคพไธฆๅฐๅ
ถ่ค่ฃฝๅฐ/sdcard๏ผๅฎๆๅๆจ็ๅ
ง็ฝฎๅ
ง้จๅญๅฒใ ไนๅพ๏ผๆจๆ่ฉฒๅฏไปฅๅฐๆๆฉ้ฃๆฅๅฐPCไธฆๅๅพๅธธไธๆจฃๅพๅ
ง้จๅญๅฒๅจไธญๅพฉ่ฃฝ่ณๆๅคพใ ๅฆๆๆจ็ขบๅฎๅทฒๅฐ่ณๆๅคพ่ค่ฃฝๅฐๆญฃ็ขบ็ไฝ็ฝฎๅฏ่ฉฒ่ณๆๅคพ็กๆณ้กฏ็คบ๏ผ่ซๅ่ฉฆ้ๆฐๅๅๆๆฉใ
Now, you can choose if you want to import your authenticator to WinAuth first, then to ASF, or to ASF right away. ๅ ๅฐ้ฉ่ญๅจๅฐๅ ฅWinAuth็้ธ้ ๆดๅๅฅฝ๏ผๅฎๅ ่จฑๆจๅจๆจ็PCไธๅไปฝ่บซไปฝ้ฉ่ญๅจ๏ผ้ๆจฃๆจๅฐฑๅฏไปฅๅพ3ๅไธๅ็ๅฐๆน็ๆไปฃ็ขผไธฆ็ขบ่ชไบคๆโโๆจ็ๆๆฉ๏ผๆจ็PCไปฅๅASFใ ๅฆๆๆจๆณ้ๆจฃๅ๏ผๅช้ๆ้WinAuth๏ผๆทปๅ ๆฐ็Steam่บซไปฝ้ฉ่ญๅจไธฆๅพAndroid้ธ้ ไธญ้ธๆๅฐๅ ฅ๏ผ็ถๅพ้ตๅพชๆๅ๏ผ่จชๅๆจไนๅ็ฒๅพ็ๆชๆกใ ๅฎๆๅพ๏ผๆจๅฏไปฅๅฐๆญค้ฉ่ญๅจๅพWinAuthๅฐๅ ฅASF๏ผ้ๅฐๅจไธ้ข็WinAuth้จๅไธญๅฐ้้ฒ่ก่ชชๆใ
If you don't want to or don't need to go through WinAuth, then simply copy files/Steamguard-<SteamID> file from our protected directory, where SteamID is your 64-bit Steam identificator of the account that you want to add (if more than one, because if you have only one account then this will be the only file). ๆจ้่ฆๅฐ่ฉฒๆชๆพๅ
ฅASFconfig็ฎ้ไธญใ Once you do that, rename the file to BotName.maFile, where BotName is the name of your bot you're adding ASF 2FA to. After this step, launch ASF - it should notice the .maFile and import it.
[*] INFO: ImportAuthenticator() <1> Converting .maFile into ASF format...
[*] INFO: ImportAuthenticator() <1> Successfully finished importing mobile authenticator!
That's all, assuming that you've imported the correct file with valid secrets, everything should work properly, which you can verify by using 2fa commands. If you made a mistake, you can always remove Bot.db and start over if needed.
For iOS you can use ios-steamguard-extractor. This is possible thanks to the fact that you can make decrypted backup, put in on your PC and use the tool in order to extract Steam data that is otherwise impossible to get (at least without jailbreak, due to iOS encryption).
Head over to latest release in order to download the program. Once you extract the data you can put it e.g. in WinAuth, then from WinAuth to ASF (although you can also simply copy generated json starting from { ending on } into BotName.maFile and proceed like usual). If you ask me, I strongly recommend to import to WinAuth first, then making sure that both generating tokens as well as accepting confirmations work properly, so you can be sure that everything is alright. If your credentials are invalid, ASF 2FA will not work properly, so it's much better to make ASF import step your last one.
ๆ้ๅ้ก/้ฏ่ชค๏ผ่ซ่จชๅ** issues **ใ
่ซ่จไฝ๏ผไธ้ข็ๅทฅๅ ทๆฏ้ๅฎๆน็๏ผๆจไฝฟ็จๅฎ้่ฆ่ชๆ้ขจ้ชใ We do not offer technical support if it doesn't work properly - we got a few signals that it's exporting invalid 2FA credentials - verify that confirmations work in authenticator like WinAuth prior to importing that data to ASF!
ๅฆๆๆจ็่บซไปฝ้ฉ่ญๅจๅทฒ็ถๅจSDAไธญ้่ก๏ผๆจๆ่ฉฒๆณจๆๅฐmaFiles่ณๆๅคพไธญๅญๅจsteamID.maFileๆไปถใ Make sure that maFile is in unencrypted form, as ASF can't decrypt SDA files - unencrypted file content should start with { and end with } character. If needed, you can remove the encryption from SDA settings first, and enable it again when you're done. Once the file is in unencrypted form, copy it to config directory of ASF.
You can now rename steamID.maFile to BotName.maFile in ASF config directory, where BotName is the name of your bot you're adding ASF 2FA to. ๆ่
ๆจๅฏไปฅไฟๆๅๆจฃ๏ผASFๆๅจ็ป้ๅพ่ชๅ่ญๅฅๅฎใ Renaming the file helps ASF by making it possible to use ASF 2FA before logging in, if you don't do that, then the file can be picked only after ASF successfully logs in (as ASF doesn't know steamID of your account before in fact logging in).
ๅฆๆๆจๆญฃ็ขบๅท่กไบๆๆๆไฝ๏ผ่ซๅๅASF๏ผๆจๆ่ฉฒๆณจๆๅฐ๏ผ
[*] INFO: ImportAuthenticator() <1> Converting .maFile into ASF format...
[*] INFO: ImportAuthenticator() <1> Successfully finished importing mobile authenticator!
ๅพ็พๅจ้ๅง๏ผๆจ็ASF 2FAๆ่ฉฒๅฏไปฅๅจๆญคๅธณๆถ้่กใ
Firstly create new empty BotName.maFile in ASF config directory, where BotName is the name of your bot you're adding ASF 2FA to. Remember that it should be BotName.maFile and NOT BotName.maFile.txt, Windows likes to hide known extensions by default. ๅฆๆๆจๆไพ็ๅ็จฑไธๆญฃ็ขบ๏ผASFๅฐไธๆ่ญๅฅๅฎใ
็พๅจๅๅพๅธธไธๆจฃๅๅWinAuthใ ๅณ้ตๅฎๆSteamๅๆจ๏ผ็ถๅพ้ธๆโ้กฏ็คบSteamGuardๅๆขๅพฉไปฃ็ขผโใ ็ถๅพ้ธๆโๅ
่จฑ่ค่ฃฝโใ You should notice familiar to you JSON structure on the bottom of the window, starting with {. Copy whole text into a BotName.maFile file created by you in previous step.
ๅฆๆๆจๆญฃ็ขบๅท่กไบๆๆๆไฝ๏ผ่ซๅๅASF๏ผๆจๆ่ฉฒๆณจๆๅฐ๏ผ
[*] INFO: ImportAuthenticator() <1> Converting .maFile into ASF format...
[*] INFO: ImportAuthenticator() <1> Successfully finished importing mobile authenticator!
ๅพ็พๅจ้ๅง๏ผๆจ็ASF 2FAๆ่ฉฒๅฏไปฅๅจๆญคๅธณๆถ้่กใ
From this moment, all 2fa commands will work as they'd be called on your classic 2FA device. You can use both ASF 2FA and your authenticator of choice (Android, iOS, SDA or WinAuth) to generate tokens and accept confirmations.
If you have authenticator on your phone, you can optionally remove SteamDesktopAuthenticator and/or WinAuth, as we won't need it anymore. However, I suggest to keep it just in case, not to mention that it's more handy than normal steam authenticator. Just keep in mind that ASF 2FA is NOT a general purpose authenticator, it doesn't include all data that authenticator should have, but limited subset of original maFile. It's not possible to convert ASF 2FA back to original authenticator, therefore always make sure that you have general-purpose authenticator or maFile in other place, such as in WinAuth/SDA, or on your phone.
ๅฆๆASF 2FAๅฏ็จ๏ผASFๅฐไฝฟ็จๅฎ่ชๅ็ขบ่ช็ฑASF็ผ้/ๆฅๅ็ไบคๆใ ๅฎ้ๅฏไปฅๆ นๆ้่ฆ่ชๅ็ๆ2FAไปฃ็ขผ๏ผไพๅฆ็บไบ็ป้ใ ้คๆญคไนๅค๏ผ้ๅฏไปฅๅท่ก2faๅฝไปคไปฅไฝฟ็จASF 2FAใ That should be all for now, if I didn't forget about anything - basically ASF uses 2FA module on as-needed basis.
ๆจ้่ฆ2FAไปฃ็ขผๆ่ฝ่จชๅๅ2FAไฟ่ญท็ๅธณๆถ๏ผๅ
ถไธญๅ
ๆฌๅ
ทๆASF 2FA็ๆฏๅๅธณๆถใ ๆจๆ่ฉฒๅจ็จๆผๅฐๅ
ฅ็่บซไปฝ้ฉ่ญๅจไธญ็ๆไปฃ็ขผ๏ผไฝๆจไนๅฏไปฅ้้่ๅคฉๅ็ตฆๅฎๆฉๅจไบบ็็ผ้2faๅฝไปค็ๆ่จๆไปฃ็ขผใ ๆจ้ๅฏไปฅไฝฟ็จ2fa <BotNames>ๅฝไปค็บ็ตฆๅฎ็ๆฉๆขฐไบบๅฏฆไพ็ๆ่จๆไปฃ็ขผใ ้ๆ่ฉฒ่ถณไปฅ่ฎๆจ่จชๅๆฉๆขฐไบบๅธณๆถ๏ผไพๅฆ้้็่ฆฝๅจ๏ผไฝๅฆไธๆ่ฟฐโโๆจๆ่ฉฒไฝฟ็จๅๅฅฝ็่บซไปฝ้ฉ่ญๅจ๏ผAndroid๏ผiOS๏ผSDAๆWinAuth๏ผใ
ๆฏ็๏ผๆจ็ๅๅง้ฉ่ญๅจไป็ถๅฏ็จไธฆๅฏไปฅ่ASF 2FAไธ่ตทไฝฟ็จใ ้ๅฐฑๆฏๆดๅ้็จโโๆๅๅฐๆจ็่บซไปฝ้ฉ่ญๅจๆๆๅฐๅ ฅASF๏ผๅ ๆญคASFๅฏไปฅไฝฟ็จๅฎๅไธฆไปฃ่กจๆจๆฅๅ้ธๅฎ็็ขบ่ชใ
ASFๆตๅ้ฉ่ญๅจไปฅๅ่็ตฆๅฎๅธณๆถ็ธ้็ๅ
ถไป้้ตๆธๆไฟๅญๅจ้
็ฝฎ็ฎ้ไธญ็BotName.dbๆชๆกไธญใ ๅฆๆๆจๆณ็งป้คASF 2FA๏ผ่ซ้ฑ่ฎไปฅไธๅ
งๅฎนใ
Simply stop ASF and remove associated BotName.db of the bot with linked ASF 2FA you want to remove. This option will remove associated imported 2FA with ASF, but will NOT delink your authenticator. If you instead want to delink your authenticator, apart from removing it from ASF (firstly), you should delink it in authenticator of your choice (Android, iOS, SDA or WinAuth), or - if you can't for some reason, use revocation code that you received during linking that authenticator, on the Steam website. It's not possible to unlink your authenticator through ASF, this is what general-purpose authenticator that you already have should be used for.
ๆๅฐ่บซไปฝ้ฉ่ญๅจ้ๆฅๅฐSDA/WinAuth๏ผ็ถๅพๅฐๅ ฅๅฐASFใ ๆ็พๅจๅฏไปฅๅๆถ้ๆฅไธฆๅจๆๆฉไธๅๆฌก้ๆฅๅ๏ผ
ๅพๆชใ ASF ๅฐๅ ฅๆจ็่บซไปฝ้ฉ่ญๅจๆธๆไปฅไพฟไฝฟ็จๅฎใ ๅฆไธๆ่ฟฐ๏ผๅฆๆๆจไฝฟ็จ่บซไปฝ้ฉ่ญๅจ๏ผ้ฃ้บผๆจไนๆๅฐ่ดASF 2FAๅๆญข้่ก๏ผ็ก่ซๆจๆฏๅฆ้ฆๅ ๅฐๅ ถ็งป้คใ ๅฆๆๆจๆณๅจๆๆฉๅASFไธไฝฟ็จ่บซไปฝ้ฉ่ญๅจ๏ผๅ ไธSDA/WinAuthไธญ็่บซไปฝ้ฉ่ญๅจ๏ผ๏ผ้ฃ้บผๆจ้่ฆๅพๆๆฉไธญๅฐๅ ฅๆจ็่บซไปฝ้ฉ่ญๅจ๏ผ่ไธๆฏๅจSDA/WinAuthไธญๅตๅปบๆฐ่บซไปฝ้ฉ่ญๅจใ ๆจๅช่ฝๆๆไธๅ้ๆฅ่บซไปฝ้ฉ่ญๅจ๏ผ้ๅฐฑๆฏASF ๅฐๅ ฅ่ฉฒ่บซไปฝ้ฉ่ญๅจๅๅ ถๆธๆ็ๅๅ ๏ผไปฅไพฟๅฐๅ ถ็จไฝASF 2FAโโๅฎ่ๅๆฌ็่บซไปฝ้ฉ่ญๅจ็ธๅ๏ผๅชๆฏๅญๅจๆผๅ ฉๅๅฐๆนใ If you decide to delink your mobile authenticator credentials - regardless in which way, ASF 2FA will stop working, as previously copied mobile authenticator credentials will no longer be valid. ๅฆไธๆ่ฟฐ๏ผ่ฆๅจๆๆฉไธๅฐASF 2FA่่บซไปฝ้ฉ่ญๅจไธ่ตทไฝฟ็จ๏ผๆจๅฟ ้ ๅฐๅ ถๅพAndroid/iOSๅฐๅ ฅใ
ๆฏ็๏ผๆๅนพๅๅๅ ใ First and most important one - using ASF 2FA significantly increases your security, as ASF 2FA module ensures that ASF will only accept automatically its own confirmations, so even if attacker does request a trade that is harmful, ASF 2FA will not accept such trade, as it was not generated by ASF. In addition to security part, using ASF 2FA also brings performance/optimization benefits, as ASF 2FA fetches and accepts confirmations immediately after they're generated, and only then, as opposed to inefficient polling for confirmations each X minutes done e.g. by SDA or WinAuth. In short, there is no reason to use third-party authenticator over ASF 2FA, if you plan on automating confirmations generated by ASF - that's exactly what ASF 2FA is for, and using it does not conflict with you confirming everything else in authenticator of your choice. We strongly recommend to use ASF 2FA for entire ASF activity - this is much more secure than any other solution.
ๅฆๆๆจๆฏ้ซ็ด็จๆถ๏ผ้ๅฏไปฅๆๅ็ๆmaFileใ This can be used in case you'd want to import authenticator from other sources than the ones we've described above. ๅฎๆๆ็**ๆๆJSON็ตๆง**ๅฆไธ๏ผ
{
"shared_secret": "STRING",
"identity_secret": "STRING"
}ๆจๆบ้ฉ่ญๅจๆธๆๆๆดๅคๅญๆฎตโโๅจๅฐๅ
ฅๆ้ๅฎๅๅฎๅ
จ่ขซASFๅฟฝ็ฅ๏ผๅ ็บๅฎๅไธๆฏๅฟ
้็ใ You don't have to remove them - ASF only requires valid JSON with 2 mandatory fields described above, and will ignore additional fields (if any). Of course, you need to replace STRING placeholder in the example above with valid values for your account. Each STRING should be base64-encoded representation of bytes the appropriate private key is made of.
 |
 |
 |
 |
|---|---|---|---|
 |
 |
 |
 |
|---|---|---|---|
- ๐ก Home
- ๐ฌ FAQ
- โ๏ธ Setting up (start here)
- ๐ฅ ๅพๅฐๅบ่ๅๅๅจ
- ๐ข Commands
- ๐ ๏ธ Compatibility
- ๐ง Configuration
- ๐งฉ ItemsMatcherPlugin
- ๐ Management
- โฑ๏ธ ๆง่ฝ
- ๐ก Remote communication
- ๐ช Steam ่ฆชๅๅไบซ
- ๐ ไบคๆ